Just rec'd my S1 and Mazzer mini from Chris'. Thanks to Chas for this site which helped me in my decision making and to Chris for such awesome service!
Everything is tuned in and working great. The only oddity I have experienced is that my steam knob must be turned approx. 1/2 turn before it engages and then the another 3/4 turn for full steam power. Is this normal or is there an adjustment that can be made to eliminate the initial "dead spot"?
Also, any tips on daily/weekly/monthly cleaning of the mini Mazzer would be appreicated. The residual grinds in the hopper and doser drive me crazy.
steam control
- chas
- Vivaldi Dreamer
- Posts: 3057
- Joined: Wed Jun 02, 2004 11:52 pm
- Location: Central Maryland
- Contact:
I'm so used to the way my S1 works I'm not sure how far I have to turn the steam knob for a given amount of steam. I try to pay attention tomorrow.
Welcome to the world of the Mazzer Mini. I traded up to the Mini-E several months ago so I don't have this problem any more though that's an expensive way to save from brushing out the doser.
When I had the original Mini my method was as follows:
My brush is like this one: http://www.espressoparts.com/product/3007
You'll find lots of other more creative solutions if you Google alt.coffee
Welcome to the world of the Mazzer Mini. I traded up to the Mini-E several months ago so I don't have this problem any more though that's an expensive way to save from brushing out the doser.
When I had the original Mini my method was as follows:
- - Weigh the desired amount of beans and place in hopper
- Grind entire amount
- User a round brush to brush grounds out of grinder throat opening into doser
- Dose grinds into PF
My brush is like this one: http://www.espressoparts.com/product/3007
You'll find lots of other more creative solutions if you Google alt.coffee
Chas
LM GS/3 & LaSpaziale Dream v 1.25 (US 120V)
Mazzer Kony E, Customized Rocky
Hottop P/B
LM GS/3 & LaSpaziale Dream v 1.25 (US 120V)
Mazzer Kony E, Customized Rocky
Hottop P/B
- chas
- Vivaldi Dreamer
- Posts: 3057
- Joined: Wed Jun 02, 2004 11:52 pm
- Location: Central Maryland
- Contact:
Re: steam control
Sounds like yours works the same as all others. I turn my knob 1/2 turn before I feel any resistance. Over the next 1/4 turn it ramps to full steam power. I don't notice any more pressure increase over the remaining 1/2 turn of travel.doppio wrote:...
Everything is tuned in and working great. The only oddity I have experienced is that my steam knob must be turned approx. 1/2 turn before it engages and then the another 3/4 turn for full steam power. Is this normal or is there an adjustment that can be made to eliminate the initial "dead spot"?
...
Chas
LM GS/3 & LaSpaziale Dream v 1.25 (US 120V)
Mazzer Kony E, Customized Rocky
Hottop P/B
LM GS/3 & LaSpaziale Dream v 1.25 (US 120V)
Mazzer Kony E, Customized Rocky
Hottop P/B
Thanks for the input
Chas - Thanks for the tips on the Mazzer. I read your review of the mini E on coffeegeek which outlined your routine for the mini w/doser. I've adopted the same routine.
I've had the S1 for 2 weeks now and LOVE it. Had my first party and served 6 people effortlessly. Shots are consistent and delicious.
Can't wait for my bottomless PF to arrive.
I've had the S1 for 2 weeks now and LOVE it. Had my first party and served 6 people effortlessly. Shots are consistent and delicious.
Can't wait for my bottomless PF to arrive.