They were polished turned solid aluminum about 2-1/4" long threaded on both ends with a little foot threaded on one end which could be removed to stack 2 together. $7.75 each. The thread was 5/16", a larger bolt than the S1 so I drilled out the threads in the S1 to allow the right size bolt to pass through and put them on. (I removed the side panels to get at the rear legs -Chris better hope that 3 handed guy never retires..) When I reattached the portafilter the machine slid to the side. So a trip to the neighborhood hardware for some thin sticky back furniture leg pads. Problem solved. Now I can very easily wipe under the machine without the back of my hand getting fried or needing to pick up the front of the machine to clean all the way back. Beating the look of the original legs wasn't hard either.
Here is the kicker for me. These "legs" are called stand-offs and are widely available in a variety of lengths, diameters and materials.
I need to get out more. The sign people use these things to stand off mount plex or glass on a wall or counter. I googled stand-offs last night and found several companies selling them. The prices vary a lot. Here is an example: http://www.fixturepronto.com/lit_standoffs.htm With a little research you may be able to find some with the right metric thread so the job would really easy on an S1. Now if I could only find the other name for money that makes it widely available.. would that be a cdo or another instrument of the too big to fail?
tom
