![Cool 8)](./images/smilies/icon_cool.gif)
water pressure
water pressure
what is the recommended water pressure to use with the new programmable preinfusion on the S1 ![Cool 8)](./images/smilies/icon_cool.gif)
![Cool 8)](./images/smilies/icon_cool.gif)
Re: water pressure
Chris suggested 25psi but everyone has been experimenting with different pressures as high as 50 psi.
Re: water pressure
when do you measure the pressure; machine on or off; right now my gauge reads 25 psi which i set as the boiler was filling, but i havent experimented much with it yet
how many seconds of pi are you using; does it vary from bean to bean![Cool 8)](./images/smilies/icon_cool.gif)
how many seconds of pi are you using; does it vary from bean to bean
![Cool 8)](./images/smilies/icon_cool.gif)
Re: water pressure
To be honest I seldom turn on the p/i but you would set the line pressure with water running through the group head or when the steam boiler fills. Mines set at 30 psi right now & I've tried a variety of different p/i times. Seems to work ok with large doses but otherwise I prefer the non p/i shots.
Re: water pressure
I've had mine as high as 45 psi, gone back down between 30-35 now (and I say this because the damn regulator isn't exactly stable).
My favorite preinfusion setting is 6 seconds @ 35psi for my typical shots which are Ristrettos 99% of the time. I run them so tight that the machine literally chokes and blinks on occassion
...what can I say, the man can handle his juice![Laughing :lol:](./images/smilies/icon_lol.gif)
My favorite preinfusion setting is 6 seconds @ 35psi for my typical shots which are Ristrettos 99% of the time. I run them so tight that the machine literally chokes and blinks on occassion
![Wink ;-)](./images/smilies/icon_wink.gif)
...what can I say, the man can handle his juice
![Laughing :lol:](./images/smilies/icon_lol.gif)
Re: water pressure
How high are you dosing with the 6 second setting? I like the p/i (5 sec/30psi) with my larger doses (17-18g) but don't care for it with smaller 13-14g doses. My favorite shots are pulled tight & run long.Niko wrote:I've had mine as high as 45 psi, gone back down between 30-35 now (and I say this because the damn regulator isn't exactly stable).
My favorite preinfusion setting is 6 seconds @ 35psi for my typical shots which are Ristrettos 99% of the time. I run them so tight that the machine literally chokes and blinks on occassion![]()
...what can I say, the man can handle his juice
Re: water pressure
i started off with 3 seconds at 25 psi and have since moved to 4 seconds, but still at 25 psi. you think 5 or more is the ticket? what does more preinfusion do? why would you not use preinfusion with a smaller shot, say a single ![Cool 8)](./images/smilies/icon_cool.gif)
![Cool 8)](./images/smilies/icon_cool.gif)
Re: water pressure
I'm going strictly by taste & 5 seconds gave me a better tasting 17gr double then 3 seconds or no p/i with the Daterra Reserve. It brought out a sweetness I wasn't getting otherwise. I've yet to find anything I like about p/i when pulling 13-14g doubles with either s/os or blends. With p/i they taste washed out & I get the best flavors with it turned off. I've never used the single basket so I can't comment on p/i & singles.
Re: water pressure
My doses are 15 grams for SO Ristrettos and about 16.5 grams for Hairbender. My shots pull in about 30-40 seconds lately (not including the p/i time - the timer starts after the pump sounds on).JohnB wrote: How high are you dosing with the 6 second setting? I like the p/i (5 sec/30psi) with my larger doses (17-18g) but don't care for it with smaller 13-14g doses. My favorite shots are pulled tight & run long.
Re: water pressure
Niko wrote:My doses are 15 grams for SO Ristrettos and about 16.5 grams for Hairbender. My shots pull in about 30-40 seconds lately (not including the p/i time - the timer starts after the pump sounds on).
Thats the same time range of most of my shots.
Re: water pressure
for me 15gs doesnt fill up the portafilter with the coffees i have been using from ecco caffe; im using closer to 16.5gs with them, getting good shots, around 30 - 35 seconds. when you say ristretto, does that mean generally the weight of the shot equal to the weight of the coffee i.e. s maller shot than an espresso ![Cool 8)](./images/smilies/icon_cool.gif)
![Cool 8)](./images/smilies/icon_cool.gif)
Re: water pressure
I don't know about Niko but I neither weigh nor measure the volume of my shots. I go for a pour that starts off with big, thick, gloppy drops & usually starts to go blond between 30-40 seconds. These are typically sweeter & give the flavors I prefer over what I have gotten with the "standard" 25 sec pour. If I had to guess I would say they are closer to 1.5oz then 2oz.
Re: water pressure
i weighed a few shots to set the water volume for the single and double buttons on the machine; they were a bit out of wack when i got the machine from chris coffee. how do you define a ristretto as compared to an espresso ![Cool 8)](./images/smilies/icon_cool.gif)
![Cool 8)](./images/smilies/icon_cool.gif)
Re: water pressure
I weigh every shot
My doubles are never past 1.5oz, in fact they're 1.25ish most of the time.
And like John, I don't stop them at any particular volume or time frame - I just cut the shot off when it starts to blonde.
My basket never fills at 15 grams, it's well below the rim - I use a weird crooked-finger technique to distribute and smooth out the grinds before tamping.
Now my tamping has gotten EXTREMELY lazy...to the point where I don't tamp anymore. I just ram it under the MACAP Autotamper (the large table top version). So it's slam, bam, thank you Spaz...
![Embarassed :oops:](./images/smilies/icon_redface.gif)
My doubles are never past 1.5oz, in fact they're 1.25ish most of the time.
And like John, I don't stop them at any particular volume or time frame - I just cut the shot off when it starts to blonde.
My basket never fills at 15 grams, it's well below the rim - I use a weird crooked-finger technique to distribute and smooth out the grinds before tamping.
Now my tamping has gotten EXTREMELY lazy...to the point where I don't tamp anymore. I just ram it under the MACAP Autotamper (the large table top version). So it's slam, bam, thank you Spaz...
Re: water pressure
how would you define your ristrettos as compared to your espressos, thicker, less volume? what do your ristretto shots weigh, around 15gs ![Cool 8)](./images/smilies/icon_cool.gif)
![Cool 8)](./images/smilies/icon_cool.gif)
Re: water pressure
Thicker, syrupy, sweeter, denser, bolder, robust, compact, gelatinous, viscous...
damn, I ran out of words.
They're just better![Very Happy :grin:](./images/smilies/icon_biggrin.gif)
More isn't always better.![Cool 8)](./images/smilies/icon_cool.gif)
damn, I ran out of words.
![scratch :scratch:](./images/smilies/icon_scratch.gif)
They're just better
![Very Happy :grin:](./images/smilies/icon_biggrin.gif)
More isn't always better.
![Cool 8)](./images/smilies/icon_cool.gif)
Re: water pressure
I've also stopped worrying about the "30lb tamp" & just give it a quick push, much lighter then 30lbs.
Re: water pressure
That pretty much covers it!Niko wrote:Thicker, syrupy, sweeter, denser, bolder, robust, compact, gelatinous, viscous...
damn, I ran out of words.![]()
They're just better
More isn't always better.
![Laughing :lol:](./images/smilies/icon_lol.gif)
Re: water pressure
I think the 30lb tamp is going out of styleJohnB wrote:I've also stopped worrying about the "30lb tamp" & just give it a quick push, much lighter then 30lbs.
![Laughing :lol:](./images/smilies/icon_lol.gif)
- chas
- Vivaldi Dreamer
- Posts: 3045
- Joined: Wed Jun 02, 2004 11:52 pm
- Location: Central Maryland
- Contact:
Re: water pressure
Yes, I think the Vivaldi does much better with a finer grind and a light tamp.
Chas
LM GS/3 & LaSpaziale Dream v 1.25 (US 120V)
Mazzer Kony E, Customized Rocky
Hottop P/B
LM GS/3 & LaSpaziale Dream v 1.25 (US 120V)
Mazzer Kony E, Customized Rocky
Hottop P/B
Re: water pressure
agreed; with preinfusion, my shots with the naked portafilter look as good as the youtube videos ![Cool 8)](./images/smilies/icon_cool.gif)
![Cool 8)](./images/smilies/icon_cool.gif)