Temperature Offset Tests

If you have already upgraded your controller board to support the new +-8C offset option and have a question or comment about it, post here.
Locked
woodchuck

Temperature Offset Tests

Post by woodchuck » Thu Jun 26, 2008 11:14 am

Chris was kind enough to lend me a thermofilter to test the offset on the VII. I posted a short note in HB. I'll get more testing done next week.

Cheers

Ian

http://www.home-barista.com/forums/temp ... t7348.html

woodchuck

Re: Temperature Offset Tests

Post by woodchuck » Mon Jun 30, 2008 7:27 pm

A couple of more tests with the Scace. My findings suggest pulling a couple of warming shots before your target, I had been pulling only one before.

http://www.home-barista.com/forums/temp ... t7348.html

Cheers

Ian

PS Boy I am beginning to really like this preinfusion thing!

User avatar
Niko
Caffeinus Reappearus
Posts: 435
Joined: Thu Jun 05, 2008 3:30 am
Location: Sacramento, CA
Contact:

Re: Temperature Offset Tests

Post by Niko » Mon Jun 30, 2008 9:19 pm

woodchuck wrote:A couple of more tests with the Scace. My findings suggest pulling a couple of warming shots before your target, I had been pulling only one before.
I found out the same thing in my tests last year with the Scace. Two flushes does the trick every time :wink:
Thanks for encouragement about the preinfusion, Ian. I can't wait to get my board back :bounce:
La Spaz VII (with timer) S5 Steam Arm & Passive Pre-Infusion, Mazzer Mini E Type B, MACAP MC4 Doserless,
MACAP Autotamper, 3 Thor tampers, Espro convex & CoffeeLabs tamper.
Scace Device, Alessi steam pitchers, Motta Steam pitcher, etc..

La Spaz S1 S5 Steam Arm w/ progressive preinfusion, Compak K3 Touch Doserless, Espro flat tamp
Hottop P, Behmor, iRoast2 and Gene Cafe

Locked

Return to “Post Installation Discussion on New Temp Offset Option”