Steam Boiler not refilling

Did your new VII work fine initially but have an in warranty (year one) problem later. Post here for advice. Later report on your fix. Posted photos documenting repairs are encouraged.
Post Reply
mswanson

Steam Boiler not refilling

Post by mswanson »

After repairing my flow meter, my S1 somehow got into a weird state where the steam boiler wasn't filling.

This morning I dispensed about 2 oz of hot water. Then about 4 hours later, I attempted to dispense a couple cups of hot water. Nothing but steam came out. The boiler red light was flashing indicating it was attempting to fill. I rechecked my water line and pulled a blank shot and everything seemed fine.

I unplugged my machine and let it refill. Now everything is working fine again.

Very strange. Hopefully nothing was damaged in this orphaned state it got into.
Niko

Post by Niko »

I remember the same (or very similar) thing happened to another member once. He unplugged the machine and rebooted and everything had been fine since. These machines are sometimes like computers, a hard reboot is all that's needed for a quick fix.
Hopefully yours will continue working well for you.
Post Reply

Return to “VII In Warranty Problems”