Locating SW Version and Serial Number...and More

[chas]

Jason of CCS shared this undocumented feature with me this afternoon...

From the main (Home) screen, press and hold the Up arrow for 2-3 seconds. A screen will pop up that displays your machine's serial number and the currently installed software version.

Is everyone on SW version 1.07?

[etout00]

+1
I'm on SW version 1.07

[PyroKerry]

Me too.
Kerry

[chas]

I now know of three different modes that use the up and/or down arrows while not in Menu mode. One I originally documented in this thread about pressing and holding the Up Arrow key to find out the Serial Number and Software version for the machine. The second is documented in the User's Manual to hold the Down Arrow key for several seconds and you get a list of the Profiles so that you can easily switch between them.

The new one I just discovered starts by using the Up Arrow key to display the serial number and software version. I had intended to exit back to the Home screen but pressed the Down arrow instead of the Menu key. Doing this allows you to scroll through three screens of system status information rather than cycling through the Menu screens to find this information. Try it!