Will this (or any other) steam tip work on the Dream?

General questions, comments, and discussions about the Plumbed Dream machine. New owners post your impressions of your Dream - likes, dislikes, and any other comments.
Post Reply
haroldo_psf

Will this (or any other) steam tip work on the Dream?

Post by haroldo_psf »

Meaning, are all steam tips standard size ?

I want to buy this, but not sure if it fits the dream:
https://www.espressoparts.com/sproline- ... -steam-tip

thanks!
User avatar
chas
Vivaldi Dreamer
Posts: 3044
Joined: Wed Jun 02, 2004 11:52 pm
Location: Central Maryland
Contact:

Re: Will this (or any other) steam tip work on the Dream?

Post by chas »

Unfortunately, the LaSpaziale steam arms are thread on the inside rather than on the outside. That means a tip for the S1 Dream needs to terminate with male threads. Unscrew your current tip and you will see what I mean. However, Chris Coffee and perhaps other suppliers do sell a male-male converter which would allow you to use this tip.
Chas
LM GS/3 & LaSpaziale Dream v 1.25 (US 120V)
Mazzer Kony E, Customized Rocky
Hottop P/B
haroldo_psf

Re: Will this (or any other) steam tip work on the Dream?

Post by haroldo_psf »

the closest thing I found on CC was this:

https://www.chriscoffee.com/Adapter-Con ... daptor.htm

That is not it, right?
User avatar
chas
Vivaldi Dreamer
Posts: 3044
Joined: Wed Jun 02, 2004 11:52 pm
Location: Central Maryland
Contact:

Re: Will this (or any other) steam tip work on the Dream?

Post by chas »

I think this is the right one but you might call CCS and tell them specifically what you are trying to do and see what they say. The 8mm end should fit on the Dream and I know that these tips fit on a LaMarzocco which is 10mm unless the thread pitch is wrong.
Chas
LM GS/3 & LaSpaziale Dream v 1.25 (US 120V)
Mazzer Kony E, Customized Rocky
Hottop P/B
Post Reply

Return to “Dream General Q&A”