S1V2 leak assistance

This forum contains various threads with photos on how to perform various maintenance and repairs on your S1.
Post Reply
Chura
Macchiato
Posts: 49
Joined: Fri Jul 25, 2014 8:01 am
Location: Israel

S1V2 leak assistance

Post by Chura »

Hi

My Vavaldi S1V2 feeling sick today, the leftover drawer filled to the top, and then I notices that something's wrong.
See attached video:
1. Brew head drops sometimes
2. Over-pressure (right ?) keep releasing water.

What can I check ?
tried back-flashing, still the same.

Video of the issue: https://drive.google.com/file/d/1OHZvOE ... tCmtW/view
User avatar
chas
Vivaldi Dreamer
Posts: 3044
Joined: Wed Jun 02, 2004 11:52 pm
Location: Central Maryland
Contact:

Re: S1V2 leak assistance

Post by chas »

There is no OPV on that side. There is an expansion valve (right) and a 3-way valve release tube (left) that are next to each other. What you need to do depends on which one is leaking.
exp3way.png
exp3way.png (479.64 KiB) Viewed 10469 times
Chas
LM GS/3 & LaSpaziale Dream v 1.25 (US 120V)
Mazzer Kony E, Customized Rocky
Hottop P/B
User avatar
chas
Vivaldi Dreamer
Posts: 3044
Joined: Wed Jun 02, 2004 11:52 pm
Location: Central Maryland
Contact:

Re: S1V2 leak assistance

Post by chas »

BTW: The link to the video in your original email is improperly formed so I can't watch it. Otherwise, that might answer the questions I asked previously.
Chas
LM GS/3 & LaSpaziale Dream v 1.25 (US 120V)
Mazzer Kony E, Customized Rocky
Hottop P/B
Chura
Macchiato
Posts: 49
Joined: Fri Jul 25, 2014 8:01 am
Location: Israel

Re: S1V2 leak assistance

Post by Chura »

chas wrote: Mon Mar 23, 2020 9:54 am BTW: The link to the video in your original email is improperly formed so I can't watch it. Otherwise, that might answer the questions I asked previously.
https://drive.google.com/file/d/1OHZvOE ... tCmtW/view

Maybe now ?

its the 3way, and sometimes the group.
I tend to believe the solenoid got some dirt of coffee in it that won't allow it to close properly
Following this thread https://www.s1cafe.com/viewtopic.php?t=1221 , I tried 3 rounds of backflush with coffee clean and 3 without. still he same.

Do you think its the solenoid as well ?
User avatar
chas
Vivaldi Dreamer
Posts: 3044
Joined: Wed Jun 02, 2004 11:52 pm
Location: Central Maryland
Contact:

Re: S1V2 leak assistance

Post by chas »

It's probably the 3-way valve itself and not the solenoid. You should remove the 3-way valve and check under it for obstructions. It is also possible that there is small mineral deposit inside the valve. You can try taking the valve apart to check. That said I have had this issue with 3 or 4 3-way valves over the years and was only able to get one apart. When I did, I couldn't find anything wrong, but when reassembled it worked fine. There is just a spring and a small plastic plunger inside and I have never found a place to buy those piece parts.

Worse case you may need to buy a new valve. If you look around you can find them for much less money w/o the solenoid included. Naturally it is easier to find the valve with the solenoid included, but that will bump the price up quite a bit.
Chas
LM GS/3 & LaSpaziale Dream v 1.25 (US 120V)
Mazzer Kony E, Customized Rocky
Hottop P/B
Chura
Macchiato
Posts: 49
Joined: Fri Jul 25, 2014 8:01 am
Location: Israel

Re: S1V2 leak assistance

Post by Chura »

Do you have any idea where can i get the valve only ? I guess it has to be specific model to fit in the solenoid
User avatar
chas
Vivaldi Dreamer
Posts: 3044
Joined: Wed Jun 02, 2004 11:52 pm
Location: Central Maryland
Contact:

Re: S1V2 leak assistance

Post by chas »

Since you are in Israel, does that mean you have a 230V machine?

If so, this part from espressoparts.com is probably what you need. I have not been able to find an option for the S1 that doesn't include both the valve and the solenoid.
230V, 3-way Valve
Chas
LM GS/3 & LaSpaziale Dream v 1.25 (US 120V)
Mazzer Kony E, Customized Rocky
Hottop P/B
User avatar
chas
Vivaldi Dreamer
Posts: 3044
Joined: Wed Jun 02, 2004 11:52 pm
Location: Central Maryland
Contact:

Re: S1V2 leak assistance

Post by chas »

Chas
LM GS/3 & LaSpaziale Dream v 1.25 (US 120V)
Mazzer Kony E, Customized Rocky
Hottop P/B
Chura
Macchiato
Posts: 49
Joined: Fri Jul 25, 2014 8:01 am
Location: Israel

Re: S1V2 leak assistance

Post by Chura »

So, Finally kids back to kindergarten, and I had some time to work on this.
Disassembled the solenoid, and I see the surface is full of black crap.

1. I've cleaned with dish scrub, and some with knife, but its not fully removed. What can I use to clean this ? maybe some lemon or vinegar ?
2. Where did it come from ? its 5 year old machine that is kind of 24/7 connected to 8L softner and GAC filter after
Attachments
vivaldi solenoid dirt.jpg
vivaldi solenoid dirt.jpg (83.25 KiB) Viewed 9019 times
User avatar
chas
Vivaldi Dreamer
Posts: 3044
Joined: Wed Jun 02, 2004 11:52 pm
Location: Central Maryland
Contact:

Re: S1V2 leak assistance

Post by chas »

It looks like coffee residue. How often do you do a detergent back flush?
Chas
LM GS/3 & LaSpaziale Dream v 1.25 (US 120V)
Mazzer Kony E, Customized Rocky
Hottop P/B
Chura
Macchiato
Posts: 49
Joined: Fri Jul 25, 2014 8:01 am
Location: Israel

Re: S1V2 leak assistance

Post by Chura »

chas wrote: Sun May 17, 2020 2:16 pm It looks like coffee residue. How often do you do a detergent back flush?
Apparently not enough :(
I do water only back flush once 2-3 weeks and detergent once in 2 month or so.
even that I've cleaned it, still leaking after I've re-assembled it.
Can it be that the ring is dried on the solenoid valve ?
Chura
Macchiato
Posts: 49
Joined: Fri Jul 25, 2014 8:01 am
Location: Israel

Re: S1V2 leak assistance

Post by Chura »

I've cleaned again, and its flat clean (still some black spots but feel flat)
and the moment I allow water to the system, the 3rd way leaks
how does it works, it gets inline water and once open divert the water to the group. but when it should divert the water the 3rd way ?
Chura
Macchiato
Posts: 49
Joined: Fri Jul 25, 2014 8:01 am
Location: Israel

Re: S1V2 leak assistance

Post by Chura »

So today I've found my solenoid, and also found ODE solenoid made from technopolymer that should be more robust
installed, and Vwalla, back online!

https://www.ode.it/en/prodotto/31apb-se ... certified/
Attachments
WhatsApp Image 2020-05-18 at 23.18.07.jpeg
WhatsApp Image 2020-05-18 at 23.18.07.jpeg (24.67 KiB) Viewed 8914 times
Post Reply

Return to “Maintenance and Repair”