Hey Everyone!
I've been enjoying my Mini Vivaldi ii for a while and recently figured it was time to inspect the steam boiler for scale. I made the mistake of removing the small pressure relief valve on top to look inside, and since then my steam boiler has been leaking like crazy. It leaks a bit out of the pressure relief valve below the copper "cup" that it sits on, despite trying both Teflon tape & liquid thread sealant. It also has begun to hiss regularly, which it didn't do before. A 5 hour vinegar soak of the valve made no difference.
To make matters worse, for some reason the water inlet on top of the boiler is leaking quite a bit every time it refills. As you can see from the photos, there is quite a bit of scale around it so it must have been leaking a bit before, but now it leaks a LOT. I've tried removing it but was only successful in rounding the threads.
Other than these issues, everything works great, but I'm worried about this water leakage and am at a bit of a loss on how to remove the water inlet to replace it. Any suggestions would be greatly appreciated, thanks in advance!
Mini Vivaldi ii leaking at steam boiler inlet
Mini Vivaldi ii leaking at steam boiler inlet
- Attachments
-
- image.jpg (786.46 KiB) Viewed 14530 times
-
- image.jpg (733.15 KiB) Viewed 14530 times