My machine is sooo noisy

This forum contains various threads with photos on how to perform various maintenance and repairs on your S1.
Post Reply
rracioppi

My machine is sooo noisy

Post by rracioppi »

Why does my machine vibrate so loud when I pull a shot? The machine is brand new from Chri's coffee. If I hold the sides it quietes down??
User avatar
chas
Vivaldi Dreamer
Posts: 3044
Joined: Wed Jun 02, 2004 11:52 pm
Location: Central Maryland
Contact:

Re: My machine is sooo noisy

Post by chas »

Is it a VII or a VII Mini?
Chas
LM GS/3 & LaSpaziale Dream v 1.25 (US 120V)
Mazzer Kony E, Customized Rocky
Hottop P/B
User avatar
slo
Barista
Posts: 419
Joined: Mon Aug 31, 2009 6:51 pm
Location: Montreal, Canada

Re: My machine is sooo noisy

Post by slo »

My first guess would be that the motor condensor is touching the frame (if it is a VII).
Vivaldi II, Multiple (a collection really) Lever machines
Currently on deck grinders: Mythos and MXKR
Backup grinders: Robur, Major.
Toper Cafemino Electric and Poppery 1 roaster

I have a serious problem ... Can you guess what?
rracioppi

Re: My machine is sooo noisy

Post by rracioppi »

iT IS THE v11, HOW DO i FIX IT?
User avatar
chas
Vivaldi Dreamer
Posts: 3044
Joined: Wed Jun 02, 2004 11:52 pm
Location: Central Maryland
Contact:

Re: My machine is sooo noisy

Post by chas »

Here's a thread that describes the issue and how to fix it.
viewtopic.php?f=29&t=1244&p=15037&hilit ... tor#p15037

The 2nd row of photos on the page below show the start up capacitor mounted on the top of the motor from the back of the VII. The 3rd row shows a front view.
s1v2/S1vsVII.php

In any case you will be removing the side, rear, and possibly the front covers to get at it. The photos on the page below show where the panel attachment screws are. There have been some minor design changes since these photos. There are now screws on the bottom that hold he covers to the base of the chassis and they have also added some screws to the top rail to replace the hard to get at knurled knobs used in earlier models. However, it shouldn't be too hard to figure out. In any case, not to worry. Real men always have the covers off within the first 24 hours. :twisted:
s1v1/S1Photos.php
Chas
LM GS/3 & LaSpaziale Dream v 1.25 (US 120V)
Mazzer Kony E, Customized Rocky
Hottop P/B
User avatar
slo
Barista
Posts: 419
Joined: Mon Aug 31, 2009 6:51 pm
Location: Montreal, Canada

Re: My machine is sooo noisy

Post by slo »

Yeah Capacitor ... not condensor! Doaah. :mrgreen:

With all due respect Chas. The real men are the one that manage to get the panels back on within the first 24 hrs... :twisted:

Anyway while the covers are off, I suggest to do a thorough check of all the electrical wires and connections. Also make sure that all the copper tubing are away from anything. After the motor capacitor, they would have been my second guess for rattling.

Finally if you move the capacitor back with spacers (that is what I had to do) make sure that the back end is still clear of the back cover.

Keep us posted. We may help and we may learn.
Vivaldi II, Multiple (a collection really) Lever machines
Currently on deck grinders: Mythos and MXKR
Backup grinders: Robur, Major.
Toper Cafemino Electric and Poppery 1 roaster

I have a serious problem ... Can you guess what?
JohnB

Re: My machine is sooo noisy

Post by JohnB »

There is no reason to remove anything but the front cover to access the capacitor bracket. Both the nut holding the capacitor in place & the nut holding the bracket are both right there in front.
User avatar
slo
Barista
Posts: 419
Joined: Mon Aug 31, 2009 6:51 pm
Location: Montreal, Canada

Re: My machine is sooo noisy

Post by slo »

You are correct John. It is probably possible to do a capacitor relocation from the front but to do a good job and to do the inspection that I suggested (it might not be the capacitor after all) I would still recommend to undress the Vivaldi.
Vivaldi II, Multiple (a collection really) Lever machines
Currently on deck grinders: Mythos and MXKR
Backup grinders: Robur, Major.
Toper Cafemino Electric and Poppery 1 roaster

I have a serious problem ... Can you guess what?
JohnB

Re: My machine is sooo noisy

Post by JohnB »

I had the same issue when my machine was new. If you need better access to the capacitor then the front cover provides just lift off the cup warmer tray. There is no bracket in the rear of the capacitor so you really gain nothing but aggravation by pulling off all those covers. (IMHO of course)
BobUSN

Re: My machine is sooo noisy

Post by BobUSN »

Condenser, capacitor...what's the difference?

:lol:

http://findarticles.com/p/articles/mi_q ... n13643083/
JohnB

Re: My machine is sooo noisy

Post by JohnB »

BobUSN wrote:Condenser, capacitor...what's the difference?

:lol:

http://findarticles.com/p/articles/mi_q ... n13643083/
If you are working on an old car with points it's a condenser. If you are working on an electric motor it's a capacitor. Go figure. :roll:
User avatar
slo
Barista
Posts: 419
Joined: Mon Aug 31, 2009 6:51 pm
Location: Montreal, Canada

Re: My machine is sooo noisy

Post by slo »

BobUSN wrote:Condenser, capacitor...what's the difference?
Well, for me, one is in French and the other is in English... Since most of my scientific education was done in french, I have a tendency to mix terms. :oops:
Vivaldi II, Multiple (a collection really) Lever machines
Currently on deck grinders: Mythos and MXKR
Backup grinders: Robur, Major.
Toper Cafemino Electric and Poppery 1 roaster

I have a serious problem ... Can you guess what?
oton

Re: My machine is sooo noisy

Post by oton »

slo wrote:
BobUSN wrote:Condenser, capacitor...what's the difference?
Well, for me, one is in French and the other is in English... Since most of my scientific education was done in french, I have a tendency to mix terms. :oops:
"Condensador" in spanish. :mrgreen:
User avatar
slo
Barista
Posts: 419
Joined: Mon Aug 31, 2009 6:51 pm
Location: Montreal, Canada

Re: My machine is sooo noisy

Post by slo »

Before anybody corrects me, in fact in french it is "condensateur". Very close to the spanish I see.
Vivaldi II, Multiple (a collection really) Lever machines
Currently on deck grinders: Mythos and MXKR
Backup grinders: Robur, Major.
Toper Cafemino Electric and Poppery 1 roaster

I have a serious problem ... Can you guess what?
rracioppi

Re: My machine is sooo noisy

Post by rracioppi »

Well I finally put a washer onthe capacitor screw and it moved it off the frame, WOW I can not believe this thing is that quiet, it used to sound like a plane taking off.
Post Reply

Return to “Maintenance and Repair”