manometer cris-crossed

If something breaks post warranty, let us know about it. Tell us how you fixed it. Let us know how much the parts cost.
Post Reply
Posts: 29
Joined: Mon Mar 28, 2005 10:45 am

manometer cris-crossed

Post by mswanson » Sat Jan 05, 2013 4:36 pm

I recently got my machine back from chris coffee where the repaired my pump and motor. Right now when i have it hooked up and fully heated the needles on the gauges are not pointing to any measure that makessense.

The steam gauge needle is pointing at 5 oclock and the group 7 oclock.

What shoupd i look for?

User avatar
Vivaldi Dreamer
Posts: 2637
Joined: Wed Jun 02, 2004 11:52 pm
Location: Central Maryland

Re: manometer cris-crossed

Post by chas » Sat Jan 05, 2013 5:03 pm

You need to let the machine completely cool down and also remove line water pressure from the machine. At that point both gauges should point exactly to zero. I am guessing they won't.

If they don't, that means UPS dropped or otherwise jarred your machine and the gauge needs to be replaced. Chris Coffee should make an insurance claim with UPS and send you a new gauge.
LM GS/3 & LaSpaziale Dream v 1.23 (US 120V)
Mazzer Kony E, Customized Rocky
Hottop P/B

Post Reply

Return to “VII Out-of-Warranty Problems”