Page 1 of 1
Setup and Power On shouldn't be the same thing
Posted: Wed Dec 27, 2006 4:23 pm
by wesc
Both setup (temp, shot size) and power on are enabled when holding the On/Off button for 3 seconds. Power on happens if the machine is off, setup if it is already off. This is sometimes confusing -- i've accidentally put the machine into setup mode where i end up screwing up the shot volumes.
Setup should either require a longer delay, pressing 2 buttons at once, or perhaps only start setup if you turn the machine on and hold it for a longer delay (8 seconds?)
-W
Re: Setup and Power On shouldn't be the same thing
Posted: Wed Dec 27, 2006 5:37 pm
by chas
wesc wrote:Both setup (temp, shot size) and power on are enabled when holding the On/Off button for 3 seconds. Power on happens if the machine is off, setup if it is already off. This is sometimes confusing -- i've accidentally put the machine into setup mode where i end up screwing up the shot volumes.
Setup should either require a longer delay, pressing 2 buttons at once, or perhaps only start setup if you turn the machine on and hold it for a longer delay (8 seconds?)
-W
I think you mean setup happens when you press the On button for 3 seconds when it is already on. And yes, I occasionally slip up and screw up my dosing settings, too. Not so often yet that I blame the machine rather than myself. The problem is that these kind of mistakes most often happen when you truly need a coffee which is, therefore, why they get made - a real Catch-22!