Round gauge on new S1V2 ?

Did you have a bad Day One "Out-of-Box" Experience? Ask about it here then later report back with your final resolution.
Post Reply
Chura
Macchiato
Posts: 49
Joined: Fri Jul 25, 2014 8:01 am
Location: Israel

Round gauge on new S1V2 ?

Post by Chura »

Hi Guys,

Just received my new S1V2 from Italy. It took almost 2 month because the manufacturer took he's time.
I have small question before I start exploring the machine.

The one I got has a round gauge and not square. isn't all the v2 have a square one ?

Thanks,
Chen
Chura
Macchiato
Posts: 49
Joined: Fri Jul 25, 2014 8:01 am
Location: Israel

Re: Round gauge on new S1V2 ?

Post by Chura »

I've figured its v1.
How can it be that machine manufactured on 6/10/14 is a v1 !?!?!
its gonna be long story now to change it.
User avatar
chas
Vivaldi Dreamer
Posts: 3044
Joined: Wed Jun 02, 2004 11:52 pm
Location: Central Maryland
Contact:

Re: Round gauge on new S1V2 ?

Post by chas »

The easiest way to tell is by whether the temperature LEDs on the front panel are in 5C or 1C increments. If it shows 5C then it's an S1. If it shows in 1C increments then you have some bastard 1/2 S1, 1/2 V2 version.

I just checked the LaSpaziale website and it seems that they only sell the original S1 and the S1 Dream and do not sell the V2 any longer (or MKII which is the 220V European version of the V2).
Chas
LM GS/3 & LaSpaziale Dream v 1.25 (US 120V)
Mazzer Kony E, Customized Rocky
Hottop P/B
Chura
Macchiato
Posts: 49
Joined: Fri Jul 25, 2014 8:01 am
Location: Israel

Re: Round gauge on new S1V2 ?

Post by Chura »

Now I see that. was it there before ? (maybe site never updated)
I'm not sure what I should do. return it ?
On the panel there is a 5c jumps.

What going on with La Spaz ??

Update: I've checked and I have a v2 board (3 greens lights when I connect to power).
Still not sure how La Spaz make a v1 in 2014!
From reading some posts I understand that other then the pressure guage the machine is exactly the same ?
What about SSR and internal changes ?
Chura
Macchiato
Posts: 49
Joined: Fri Jul 25, 2014 8:01 am
Location: Israel

Re: Round gauge on new S1V2 ?

Post by Chura »

Hi,

The store said they will send me transition kit from v1 to v2, which probably include front bazzel and dual gauge.
I've tried to find out if i have T #3 on my waterflow so it will be easy transition.

Can anyone take pic of the location the group pressure gauge pipe is connected ?

Thanks!
User avatar
chas
Vivaldi Dreamer
Posts: 3044
Joined: Wed Jun 02, 2004 11:52 pm
Location: Central Maryland
Contact:

Re: Round gauge on new S1V2 ?

Post by chas »

See PM I sent. It is clearly shown in the pic you sent me.
Chas
LM GS/3 & LaSpaziale Dream v 1.25 (US 120V)
Mazzer Kony E, Customized Rocky
Hottop P/B
Post Reply

Return to “VII Day One Problems”