Nothing happens when pump activated...

Did something go wrong? Ask about it here. Later report and document the resolution here including out of pocket costs for replacement parts.
Locked
italyhound
Ristretto
Posts: 78
Joined: Mon Dec 25, 2006 8:09 am

Nothing happens when pump activated...

Post by italyhound » Thu Dec 28, 2006 5:25 pm

Not a big whoop but this happens from time to time...

I hit the extraction button and I hear a noise but not the regular pump volume. Nothing comes out. If I hit the button again once or twice, it begins normally.

Has this happened to others? Not a real problem - more of a perplexing hiccup.

User avatar
chas
Vivaldi Dreamer
Posts: 2721
Joined: Wed Jun 02, 2004 11:52 pm
Location: Central Maryland
Contact:

Post by chas » Thu Dec 28, 2006 6:13 pm

It sounds like the switch is not making good contact more than anything.

You didn't mention whether it does this with the one cup button, the two cup button, or both. If it's always one or the other, then that would seem to confirm my switch theory. If both buttons do it occasionally, then it must be something else.
Chas
LM GS/3 & LaSpaziale Dream v 1.23 (US 120V)
Mazzer Kony E, Customized Rocky
Hottop P/B

italyhound
Ristretto
Posts: 78
Joined: Mon Dec 25, 2006 8:09 am

Post by italyhound » Thu Dec 28, 2006 6:53 pm

I will have to concentrate on that. I was thinking while I was posting but wasn't sure. Definitely happens with the one cup button. I will see and it makes more sense if it were just one. It doesn't seem to be causing any problems at this point.

Locked

Return to “S1 Operational Problems”