Noisy VII after changing softener

If you have a question or comment specific to the VII that doesn't fit in any other VII category, submit it here.
Post Reply
italyhound

Noisy VII after changing softener

Post by italyhound »

My machine got noisy during operation after swapping out the cartridge and I noticed it happened last time as well and got quieter over time. I assume it's air in the line getting into the machine?

How to avoid it or fix it? I ran a bunch of water and shots but still it sounds quiet cranky at me....

Evan
JohnB

Post by JohnB »

It depends how you hooked up the feed line & where your shut offs are. I have a drain/bleed line with shut off shortly after the cartridges & another shut off just before the machine. I bleed the cartridges fully through the bleed line & also disconnect/flush the feed line where the stainless line attaches from the machine. That way the only air left is in the short stainless line which passes through the machine quickly.
Post Reply

Return to “VII General Q&A”