Scaled or whatever

If you have a question or comment specific to the VII that doesn't fit in any other VII category, submit it here.
Post Reply
Posts: 42
Joined: Fri Jul 25, 2014 8:01 am
Location: Israel

Scaled or whatever

Post by Chura » Sat Nov 07, 2015 7:35 am


Just opened my 1 year old V1S2 machine, for overall clean.
I do clean it and use Cafiza once every 2 months, Use 8L razin softener and inline filter.
Water are soft, you can see the second image for sink water and machine water.

now, the valve in there is no the 3way (3way is next to it). this valve it driping every 5-10 second while the machine is on.
is it ok to be like that ? Am i doing something wrong ?

IMG_20151107_133139980.jpg (1.24 MiB) Viewed 8407 times
IMG_20151107_133540649.jpg (1.18 MiB) Viewed 8407 times

Posts: 60
Joined: Thu Apr 14, 2016 8:20 am
Location: Minnesota

Re: Scaled or whatever

Post by Futahaguro » Fri Apr 22, 2016 10:36 am

I have never used my machine yet but I have torn it apart:) Since no one has answered I will throw in my 2 cents. Since there is scale/deposits on the end of the valve that is dripping, the expansion valve, it very well may be that your valve seals have junk on them and are letting water pass by. If you look at this page from you will see the entire expansion valve assembly, #25, or the seals 24, 27 and 30, in the lower left corner. I bet if you take it apart there will be junk in there that you should be able to clean off. You probably do not even need new parts as the o-rings are Viton and last a long time. ... 6&ItemID=0
Expobar Office Pulser (12 years)
La Spaziale S1V1 2008+ (I just got it)
Rancilio Rocky Doserless (12 years)
La Spaziale Top Grinder (I just got it) (Macap M4)

Post Reply

Return to “VII General Q&A”