Dimension on the legs under VII

If you have a question or comment specific to the VII that doesn't fit in any other VII category, submit it here.
Post Reply
SimonSoCal

Dimension on the legs under VII

Post by SimonSoCal »

Hello,
I was hoping if S1 users can help me measure their VII legs distance on width as well as in length.
I'm trying to find a portable working table to fit on my upcoming VII unit.
I know on the ChrisCoffee web shows the the dimension of the machine [recalled at 16.5"] ..but I was hoping the legs will be shorter for I saw a kitchen table that might work. Just need to verify. Much appreciate.

Also, I noticed some of you have an extension on your legs based on "post your setup" forum. Can anyone please tell me what is that long cyclincal tubes that give an extra 2" in height or so.

Thank you for your help.

-Simon
MDL
Barista
Posts: 329
Joined: Sat Apr 07, 2007 11:29 am
Location: San Diego

Re: Dimension on the legs under VII

Post by MDL »

The outside dimensions of my S1 VII feet are:

14 1/8 x 12 1/4 inches.

The feet have rubber inserts in the center so you could actually take the chance of having a slightly smaller table and the rubber inserts would still sit on it. However, you would run the risk of having the machine slip off the top...

Good luck,
Mark
SimonSoCal

Re: Dimension on the legs under VII

Post by SimonSoCal »

Mark,
Thanks for your help.
Will consider what you've said.
Cheers.
Post Reply

Return to “VII General Q&A”