Hello,
I was hoping if S1 users can help me measure their VII legs distance on width as well as in length.
I'm trying to find a portable working table to fit on my upcoming VII unit.
I know on the ChrisCoffee web shows the the dimension of the machine [recalled at 16.5"] ..but I was hoping the legs will be shorter for I saw a kitchen table that might work. Just need to verify. Much appreciate.
Also, I noticed some of you have an extension on your legs based on "post your setup" forum. Can anyone please tell me what is that long cyclincal tubes that give an extra 2" in height or so.
Thank you for your help.
-Simon
Dimension on the legs under VII
Re: Dimension on the legs under VII
The outside dimensions of my S1 VII feet are:
14 1/8 x 12 1/4 inches.
The feet have rubber inserts in the center so you could actually take the chance of having a slightly smaller table and the rubber inserts would still sit on it. However, you would run the risk of having the machine slip off the top...
Good luck,
Mark
14 1/8 x 12 1/4 inches.
The feet have rubber inserts in the center so you could actually take the chance of having a slightly smaller table and the rubber inserts would still sit on it. However, you would run the risk of having the machine slip off the top...
Good luck,
Mark
Re: Dimension on the legs under VII
Mark,
Thanks for your help.
Will consider what you've said.
Cheers.
Thanks for your help.
Will consider what you've said.
Cheers.