Hi,
Can anybody help me with the input diameters of the dual pressure gauge? I want to change the mono unit on thi S1V1 with the dual manometer but the problem is I dislike the Spaziale part and want to find some other.
Regards
Dual Manometer Input Diameter
- Firochromis
- Macchiato
- Posts: 38
- Joined: Sat Nov 01, 2014 5:29 am
- Location: Ankara, Turkey
- Contact:
Dual Manometer Input Diameter
Be in Peace,
Firat Cingi
Firat Cingi
-
- Espresso
- Posts: 60
- Joined: Thu Apr 14, 2016 8:20 am
- Location: Minnesota
Re: Dual Manometer Input Diameter
**EDIT** The symbol (G) stands for GAS which is the same threading as BSPP. I called Fluid-o-tech in Connecticut to find out what the threading is since the pump documentation says GAS or NPT, and they told me that it is GAS.**END EDIT**
Reviving from the dead for an answer:) 1/8G or 1/8BSPP (same thing, 1/8G is what the Italian's use but BSPP is what most people use). This is NOT NPT. Almost all of the fittings on Cafeparts.com are BSPP, which is where I bought my Orman replacement gauge because I also did not like the La Spaziale gauges.
Reviving from the dead for an answer:) 1/8G or 1/8BSPP (same thing, 1/8G is what the Italian's use but BSPP is what most people use). This is NOT NPT. Almost all of the fittings on Cafeparts.com are BSPP, which is where I bought my Orman replacement gauge because I also did not like the La Spaziale gauges.
Expobar Office Pulser (12 years)
La Spaziale S1V1 2008+ (I just got it)
Rancilio Rocky Doserless (12 years)
La Spaziale Top Grinder (I just got it) (Macap M4)
La Spaziale S1V1 2008+ (I just got it)
Rancilio Rocky Doserless (12 years)
La Spaziale Top Grinder (I just got it) (Macap M4)