Search found 255 matches

by goodboyr
Wed Apr 26, 2023 11:47 am
Forum: Dream General Q&A
Topic: Dream opensource FW?
Replies: 1
Views: 6463

Re: Dream opensource FW?

I've attached a high res pic of the board and the spec sheet for the MCU used.
by goodboyr
Wed Apr 26, 2023 11:26 am
Forum: General Q&A
Topic: S11 Brio
Replies: 0
Views: 2165

S11 Brio

Looks like there's a Dream replacement. Seems like the same mechanical specs with a new improved user interface and display.

https://youtu.be/clhDt-a0sLE
by goodboyr
Sat Nov 13, 2021 9:50 pm
Forum: General Q&A
Topic: The LaSpaziale S1 Family Of Machines Needs A Serious Refresh!
Replies: 12
Views: 9580

Re: The LaSpaziale S1 Family Of Machines Needs A Serious Refresh!

New firmware allows the dream to work with a smart plug.

Sent from my SM-G998W using Tapatalk

by goodboyr
Tue Nov 02, 2021 1:54 pm
Forum: Mini General Q&A
Topic: Bluetooth App Connection - Help Needed
Replies: 11
Views: 3883

Re: Bluetooth App Connection - Help Needed

Agreed

Sent from my SM-G998W using Tapatalk

by goodboyr
Thu Sep 16, 2021 4:53 pm
Forum: Dream General Q&A
Topic: LaSpaziale Dream Firmware 1.24 Question
Replies: 2
Views: 1662

Re: LaSpaziale Dream Firmware 1.24 Question

It looks like if it's on, and the machine loses power, when power is restored the machine starts up. With it off, the machine reverts to standby when power is restored.

Sent from my SM-G998W using Tapatalk

by goodboyr
Wed Sep 15, 2021 1:52 pm
Forum: Dream General Q&A
Topic: LaSpaziale Dream Firmware 1.24 Question
Replies: 2
Views: 1662

Re: LaSpaziale Dream Firmware 1.24 Question

Chas. It's the second last item in the menu. Image

Sent from my SM-G998W using Tapatalk

by goodboyr
Tue Apr 13, 2021 6:39 pm
Forum: Maintenance and Repair
Topic: Steam Boiler Solenoid Fill Valve - Inlet Filter
Replies: 4
Views: 2589

Re: Steam Boiler Solenoid Fill Valve - Inlet Filter

http://s1cafe.com/viewtopic.php?f=57&t= ... 266#p24266

Check this discussion and yes that's the right diagram. If you've soaked it it's probably clean enough since it's a loose fit in the valve.
by goodboyr
Mon Oct 26, 2020 2:02 pm
Forum: Maintenance and Repair
Topic: Dream T group head boiler not primed?
Replies: 6
Views: 3345

Re: Dream T group head boiler not primed?

Take a look at page 11, part 7407 on this diagram. It's the non return valve that Chas is talking about. If it passes, it will allow water to drain back out of the pump back into the tank. It appears to be the only non return valve in the line all the way to the boiler. https://shopify-er.s3.amazona...
by goodboyr
Mon Aug 31, 2020 3:39 pm
Forum: General Q&A
Topic: The LaSpaziale S1 Family Of Machines Needs A Serious Refresh!
Replies: 12
Views: 9580

Re: The LaSpaziale S1 Family Of Machines Needs A Serious Refresh!

Oh, man...........pressure profiling!
by goodboyr
Sat Jul 18, 2020 11:00 pm
Forum: Maintenance and Repair
Topic: Water leaking out through the grouphead
Replies: 6
Views: 3713

Re: Water leaking out through the grouphead

The rubber gaskets harden over time and need replacing. If you can find the silicone rubber replacement versions they last much longer.

Sent from my SM-G973W using Tapatalk

by goodboyr
Wed Jun 24, 2020 3:57 pm
Forum: General Q&A
Topic: The LaSpaziale S1 Family Of Machines Needs A Serious Refresh!
Replies: 12
Views: 9580

Re: The LaSpaziale S1 Family Of Machines Needs A Serious Refresh!

I agree that the machine is now dated compared to modern features, and also that the promised firmware updates are vaporware. However, my Dream continues to be my daily driver, and its been great now that all the quirks and issues have been sorted. Also, I'd rather not have a new model to drool over...
by goodboyr
Mon Jun 22, 2020 3:28 pm
Forum: Mini General Q&A
Topic: Troubleshooting Tips Mini Blowing Fuses
Replies: 9
Views: 12208

Re: Troubleshooting Tips Mini Blowing Fuses

Make sure you check the main power connections. Since you have eliminated the fuse as the source, these connections at the back of the machine on mine showed signs of oxidation and overheating as well.
by goodboyr
Fri Jun 12, 2020 3:01 pm
Forum: Mini General Q&A
Topic: Troubleshooting Tips Mini Blowing Fuses
Replies: 9
Views: 12208

Re: Troubleshooting Tips Mini Blowing Fuses

More likely its a deterioration of either the fuse holder or the main power connections. La Spaz uses pretty cheap plastic fuse holders and the connections sometimes oxidize, heat up and increase resistance and current draw. Same for the main power connections. So, if you are comfortable doing elect...
by goodboyr
Wed May 06, 2020 1:52 pm
Forum: Maintenance and Repair
Topic: 4mm OD teflon tube source
Replies: 3
Views: 4469

Re: 4mm OD teflon tube source

The tubing La Spaz uses in the dream is 4mm OD by 2.5 mm ID if you are searching. Of course Chris Coffee has it, but that's certainly not local to you.

https://www.chriscoffee.com/products/te ... 4853789732

Sent from my SM-G973W using Tapatalk

by goodboyr
Tue Nov 19, 2019 9:25 am
Forum: Dream General Q&A
Topic: weird high pressure after water pressure regulator install
Replies: 4
Views: 7097

Re: weird high pressure after water pressure regulator install

And in case you are looking for the 1.24 file:

https://www.s1cafe.com/viewtopic.php?p=25517#p25517

Sent from my SM-G973W using Tapatalk

by goodboyr
Fri Oct 25, 2019 4:38 pm
Forum: Maintenance and Repair
Topic: Drip tray filling up
Replies: 4
Views: 7397

Re: Drip tray filling up

There is probably debris inside at the rubber seat of this valve that is causing the leak. You will need to take it apart and clean it. Here is the link on the instructions:

https://www.s1cafe.com/s1v2/VII_Expansion.php
by goodboyr
Fri Sep 20, 2019 10:08 pm
Forum: Dream and Dream T Common Feature Discussions
Topic: New Dream Firmware available V1.24
Replies: 4
Views: 16218

Re: New Dream Firmware available V1.24

Try this.

[The extension bin has been deactivated and can no longer be displayed.]

Sent from my SM-G973W using Tapatalk

by goodboyr
Wed Mar 27, 2019 6:47 am
Forum: General Q&A
Topic: Pump pressure vs noise
Replies: 3
Views: 6584

Re: Pump pressure vs noise

It's not just the pressure, it's the size of the line. So at static conditions the pressure might be ok , but if the line is too long or 1/4 instead of 3/8, there might be too much restriction when the pump is running. As well, that pressure during pre infusion means that you have a pressure regulat...
by goodboyr
Wed Mar 27, 2019 6:45 am
Forum: Dream and Dream T Common Feature Discussions
Topic: Dream Card reader does not work
Replies: 5
Views: 9692

Re: Dream Card reader does not work

Are you sure it's fully plugged in? I've found it's a bit finicky and if it you don't get it straight on it might be partially inserted into the plug. As well, you might want to try power cycling the machine with the card reader plugged in.

Sent from my SM-G950W using Tapatalk

by goodboyr
Sun Mar 24, 2019 12:19 pm
Forum: Dream and Dream T Common Feature Discussions
Topic: Dream Card reader does not work
Replies: 5
Views: 9692

Re: Dream Card reader does not work

Good point, Chas. Thxs.

Sent from my SM-G950W using Tapatalk


by goodboyr
Sun Mar 24, 2019 7:54 am
Forum: Dream and Dream T Common Feature Discussions
Topic: Dream Card reader does not work
Replies: 5
Views: 9692

Re: Dream Card reader does not work

On the Chris coffee site on the dream page there is a resources tab with the manuals. I think the interface manual has the details on the read/write file setup on the card. The card itself is a 256mb formated to FAT with no name. It has the .bin firmware file in the root directory. Here's a pic of t...
by goodboyr
Sun Mar 24, 2019 7:52 am
Forum: General Q&A
Topic: Pump pressure vs noise
Replies: 3
Views: 6584

Re: Pump pressure vs noise

What size and pressure is the water line that the dream is connected to? A small or restricted long line or low pressure ( less than 2 bar) might be the cause.

Sent from my SM-G950W using Tapatalk

by goodboyr
Wed Mar 13, 2019 4:04 pm
Forum: Maintenance and Repair
Topic: Fuse stuck in machine
Replies: 10
Views: 13663

Re: Fuse stuck in machine

Cool idea, only one comment. If the connections and holder are of a good quality, there really is no reason why the fuse would blow. So at the end of the day, if you replace the holder and make sure all connections at the tab and beyond are good, then you won't have any issues. On the other hand, if...
by goodboyr
Fri Mar 08, 2019 9:47 am
Forum: Maintenance and Repair
Topic: Fuse stuck in machine
Replies: 10
Views: 13663

Re: Fuse stuck in machine

Certainly in my experience with the Dream, it's the latter. Very cheap fuse holders and connections. I bought much better fuse holders at a local electronics store that were full rated for the 20 amps and replaced mine

Sent from my SM-G950W using Tapatalk

by goodboyr
Mon Dec 10, 2018 9:17 pm
Forum: Dream and Dream T Common Feature Discussions
Topic: New Dream Firmware available V1.24
Replies: 4
Views: 16218

New Dream Firmware available V1.24

Available for download as usual on the CCS site. Looks like they added a much requested feature to use a smart plug to remotely turn the machine on. Here is the change description: Improvements and Fixes: Latest Version 1.24 The update introduces the new "SMART POWER ON" function, which al...
by goodboyr
Fri Nov 02, 2018 5:02 pm
Forum: Maintenance and Repair
Topic: Mini Vivaldi S1 - can’t maintain group pressure
Replies: 6
Views: 8364

Re: Mini Vivaldi S1 - can’t maintain group pressure

I've used espresso planet for some early service before I decided to do my own and they known la spaz machines quite well.

Sent from my SM-G950W using Tapatalk

by goodboyr
Sun Oct 28, 2018 8:37 pm
Forum: Maintenance and Repair
Topic: Steam Boiler leak
Replies: 1
Views: 4404

Re: Steam Boiler leak

That's a push in fitting. If you push that thin collar towards the fitting, while pulling in the tube it will pull out. But by the looks of that fitting I would replace it. It is screwed into the boiler. Chris coffee has them ( I know because I replaced mine and got the new ones there ). Sent from m...
by goodboyr
Mon Jul 23, 2018 10:44 am
Forum: Dream T Day One Issues
Topic: New machine with a slight leak
Replies: 8
Views: 14254

Re: New machine with a slight leak

Ok. As suspected it's a small Teflon tube connection. The brass connection has a thin collar. Depower and shut off water to machine. If you push the collar back towards the fitting, while pulling on the tube, you can pull the tube out. Inspect the end of the tube for a clean, perpendicular cut. If t...
by goodboyr
Sun Jul 22, 2018 2:40 pm
Forum: Dream T Day One Issues
Topic: New machine with a slight leak
Replies: 8
Views: 14254

Re: New machine with a slight leak

It looks like it's coming from one of the small Teflon lines going into brew boiler. Remove the top panel and look down from top. This is a quick connect push in fitting that depends on a clean end cut on the Teflon and a fully pushed in connection. It's also easy to nick these lines causing a leak....
by goodboyr
Fri Jul 20, 2018 11:26 pm
Forum: Mini General Q&A
Topic: crema, crema, crema
Replies: 7
Views: 11232

Re: crema, crema, crema

If I'm not mistaken, your old machine (Saeco aroma) has a pressurized portafilter. This creates a "fake crema" since the coffee is forced through a tiny orifice in the pf. Your new machine has a proper pf and thus won't make a real crema without good fresh beans. So you've been fooled all ...
by goodboyr
Thu Apr 12, 2018 7:30 am
Forum: VII General Q&A
Topic: No more 20 amp Vivaldi
Replies: 16
Views: 20252

Re: No more 20 amp Vivaldi

See my message earlier in this thread.... My dream has been on 20 since the beginning too. Recently the fuse blew, and that's when I discovered the cheap plastic fuse holders had a 15 amp rating. (Some melting of the plastic occurred when the fuse blew). They are quite flimsy and the internal contac...
by goodboyr
Fri Apr 06, 2018 9:52 am
Forum: Maintenance and Repair
Topic: Corroded Steam Boiler/Connectors
Replies: 6
Views: 8363

Re: Corroded Steam Boiler/Connectors

I had trouble finding the insulated right angle ones, so i used the uninsulated kind with high temp heat shrink.

Sent from my SM-G950W using Tapatalk

by goodboyr
Wed Apr 04, 2018 6:13 am
Forum: Maintenance and Repair
Topic: Help with S1 VII Power Issues am I testing correctly
Replies: 15
Views: 14951

Re: Help with S1 VII Power Issues am I testing correctly

Saynor electronics on woodbine in Markham has stock of fuses if you need.

Sent from my SM-G950W using Tapatalk

by goodboyr
Sun Jan 07, 2018 2:37 pm
Forum: VII General Q&A
Topic: No more 20 amp Vivaldi
Replies: 16
Views: 20252

Re: No more 20 amp Vivaldi

I removed the fuse holder to clean the connection. Its marked on the side "2 to 15 amps".

Sent from my SM-G950W using Tapatalk

by goodboyr
Sun Jan 07, 2018 12:10 pm
Forum: VII General Q&A
Topic: No more 20 amp Vivaldi
Replies: 16
Views: 20252

Re: No more 20 amp Vivaldi

See my note below in a other thread. There are electrical components that are only rated for 15 amps.

viewtopic.php?t=2366

Sent from my SM-G950W using Tapatalk


by goodboyr
Sat Jan 06, 2018 3:26 pm
Forum: Accessories
Topic: Silicone Gasket Longevity
Replies: 35
Views: 47523

Re: Silicone Gasket Longevity

+1000. Great product.

Sent from my SM-G950W using Tapatalk

by goodboyr
Sat Jan 06, 2018 12:54 pm
Forum: Maintenance and Repair
Topic: Dream main fuse failure.
Replies: 0
Views: 7715

Dream main fuse failure.

Yesterday my 4 year old dream powered down. Checked the outlet ( it's a 20 amp) and it was fine. So I checked the main 20 amp fuse at the base of the machine (there are two there, the 20 amp main power and a 2 amp control fuse). Main fuse was blown. Put in a new one (fyi they are readily available a...
by goodboyr
Sat Dec 30, 2017 10:45 pm
Forum: Maintenance and Repair
Topic: Now what do I do?
Replies: 14
Views: 15478

Re: Now what do I do?

If water is coming out of opv as soon as water is connected then maybe boiler inlet valve is passing. Easy to pull and clean seat which usually has debris that keeps it from completely closing. With it passing, water main is directly connected to boiler and fills it up. Sent from my SM-G950W using T...
by goodboyr
Thu Nov 30, 2017 1:12 pm
Forum: Dream General Q&A
Topic: Pump priority
Replies: 7
Views: 11170

Re: Pump priority

I don't think that's what this fix is saying. To me it says that it delays display of the "Refill Water Tank" message on the Dream T while a shot is being pulled. That's different than refilling the steam boiler. Could be, but I definitely can say it is a very rare occurrence now, whereas...
by goodboyr
Thu Nov 30, 2017 3:02 am
Forum: Dream General Q&A
Topic: Pump priority
Replies: 7
Views: 11170

Re: Pump priority

Strange. I thought the latest firmware instituted a delay in the boiler refill to reduce this from happening. It used to happen a lot with mine, but with the latest firmware hasn't happened. It's a 25 second delay in boiler refill when the group is running. The specific quote from the revision note ...
by goodboyr
Fri Nov 03, 2017 9:46 am
Forum: Dream General Q&A
Topic: Going from Vivaldi II to Dream
Replies: 6
Views: 10712

Re: Going from Vivaldi II to Dream

Yup. Here's mine......upside down....
[IMG]https://uploads.tapatalk-cdn.com/201711 ... 50013b.jpg[/IMG]

Sent from my SM-G950W using Tapatalk


by goodboyr
Fri Nov 03, 2017 8:57 am
Forum: Dream General Q&A
Topic: Going from Vivaldi II to Dream
Replies: 6
Views: 10712

Re: Going from Vivaldi II to Dream

Can you not just unthread that conical piece back to hold against the adjustment nut ?
Btw, my dream does not look like that. It's got a conventional adjustment lock nut.

Sent from my SM-G950W using Tapatalk

by goodboyr
Mon Oct 16, 2017 2:33 pm
Forum: Dream In Warranty Issues
Topic: Bad Temperature Sensor
Replies: 25
Views: 72391

Re: Bad Temperature Sensor

Just as an update to this long saga. As some of you know, my Dream suffered from successive failures of the brew boiler temperature sensor. I typically could get no more than 6 months out of a sensor before the machine showed erratic temp readings, culminating in the dreaded "Failed Brew Sensor...
by goodboyr
Sat Jul 08, 2017 2:48 am
Forum: Pursuit of the God Shot
Topic: Cold nose and consistent temps
Replies: 14
Views: 23856

Re: Cold nose and consistent temps

[emoji106][emoji106][emoji106]

Sent from my SM-G900W8 using Tapatalk
by goodboyr
Fri Jul 07, 2017 11:55 am
Forum: Pursuit of the God Shot
Topic: Cold nose and consistent temps
Replies: 14
Views: 23856

Re: Cold nose and consistent temps

Lol. Cool, but just make sure your pf handle is well insulated......

Sent from my SM-G900W8 using Tapatalk
by goodboyr
Sun Jul 02, 2017 12:22 pm
Forum: Maintenance and Repair
Topic: What type is the coffee boiler temp sensor?
Replies: 12
Views: 14273

Re: RE: Re: What type is the coffee boiler temp sensor?

chas wrote:RTD PT1000 Type 501
PT1000 RTD Temp Sensor Chart.jpg
I think the "Type 501" designation is a particular manufacturers model number that was used as an example in this Wikipedia table. I do that think that applies to the la Spaz rtd's.

Sent from my SM-G900W8 using Tapatalk
by goodboyr
Fri Jun 30, 2017 10:23 pm
Forum: Maintenance and Repair
Topic: What type is the coffee boiler temp sensor?
Replies: 12
Views: 14273

Re: What type is the coffee boiler temp sensor?

My answer applies to the dream version and the newer sensors for the Vivaldi's. In any case, I am somewhat of an expert on the dream sensors, given my bad experiences with them in the early days of the dream. You can search on my user name to read those threads. I've only used sensors from ccs howev...
by goodboyr
Fri Jun 30, 2017 3:35 pm
Forum: Maintenance and Repair
Topic: What type is the coffee boiler temp sensor?
Replies: 12
Views: 14273

Re: What type is the coffee boiler temp sensor?

Pt1000 rtd

Sent from my SM-G900W8 using Tapatalk
by goodboyr
Sun Jun 25, 2017 3:21 pm
Forum: Maintenance and Repair
Topic: Filter replacement o ring
Replies: 3
Views: 5166

Re: Filter replacement o ring

Cc sells the o rings too. They are 4 inch diameter.

Sent from my SM-G900W8 using Tapatalk
by goodboyr
Fri Jun 16, 2017 11:26 am
Forum: Mini General Q&A
Topic: Screen bolt
Replies: 9
Views: 13863

Re: Screen bolt

+1000

Triple basket is the way to go. With 16.5 gm coffee load, there's plenty of headroom.

Sent from my SM-G900W8 using Tapatalk
by goodboyr
Wed Apr 12, 2017 9:24 am
Forum: Maintenance and Repair
Topic: High water pressure alarm issues
Replies: 3
Views: 5478

Re: High water pressure alarm issues

I don't think the bubbles are the issue.

Sent from my SM-G900W8 using Tapatalk
by goodboyr
Wed Apr 12, 2017 1:06 am
Forum: Maintenance and Repair
Topic: High water pressure alarm issues
Replies: 3
Views: 5478

Re: High water pressure alarm issues

I was the op on that thread. Turned out to be the pressure regulator. I changed it to the brass Watts model. I think the cheaper ones do not relieve pressure back the other way and bottle up the system. Also, if your brew temperature sensor begins to fail, typically they start to read low, causing t...
by goodboyr
Mon Oct 31, 2016 4:02 pm
Forum: Maintenance and Repair
Topic: Problem: solenoid fill valve fails every two weeks
Replies: 1
Views: 5618

Re: Problem: solenoid fill valve fails every two weeks

dream inlet valve.JPG The amount of debris that could cause this is almost microscopic. I went through a series of this, where it would stay ok for about 6 weeks and then I would have to clean again. Finally, instead of just removing the plunger and cleaning under the seat (I used a magnifying glas...
by goodboyr
Mon Aug 29, 2016 2:31 pm
Forum: Maintenance and Repair
Topic: Steam Boiler Pressure
Replies: 6
Views: 7696

Re: Steam Boiler Pressure

Control of the temperature controls the pressure. So if your temp transmitter is drifting low, it will cause the boiler to overheat and cause the pressure to go high. Your indicated temperature it will appear normal since it is being read by the bad temp sensor. These machines have a history of temp...
by goodboyr
Mon Aug 29, 2016 1:46 pm
Forum: Maintenance and Repair
Topic: Steam Boiler Pressure
Replies: 6
Views: 7696

Re: Steam Boiler Pressure

I've had this issue when a tiny bit of debris was caught under fill solenoid seat. This causes a constant leakage into boiler on my plumbed in dream.

Sent from my SM-G900W8 using Tapatalk
by goodboyr
Sat May 28, 2016 4:53 pm
Forum: Maintenance and Repair
Topic: S1 Dream - temperature drop during brew
Replies: 5
Views: 7637

Re: S1 Dream - temperature drop during brew

Meant to say "came up to 195 at end of pull".
by goodboyr
Sat May 28, 2016 6:47 am
Forum: Maintenance and Repair
Topic: S1 Dream - temperature drop during brew
Replies: 5
Views: 7637

Re: S1 Dream - temperature drop during brew

Just did a pull. Machine fully warmed up. Two warming flushes. Setpoint is 198f. 30 second pull. 16 gram load. Temp went down to 192 then came up to by end of pull.
by goodboyr
Fri May 20, 2016 12:25 pm
Forum: Maintenance and Repair
Topic: S1 Dream - temperature drop during brew
Replies: 5
Views: 7637

Re: S1 Dream - temperature drop during brew

That sounds about normal. And remember that this does not in any way represent the actual temperature that is at the pf. Tests using scace (you can search for these in this forum) show very good temperature stability for the dream assuming you've done a couple of warm-up flushes if you are starting ...
by goodboyr
Fri May 20, 2016 9:38 am
Forum: Dream T General Q&A
Topic: Why not go with the Dream?
Replies: 3
Views: 10189

Re: Why not go with the Dream?

No. That's a minor boiler level sensor issue that applies to most machines, not just la spaz. The temp sensor issue can be found by searching these forums. Some dreams have had high failure rates of the coffee boiler sensor. This doesn't apply to all dreams, just some. Reasons are not fully understo...
by goodboyr
Tue May 17, 2016 7:28 pm
Forum: Dream T General Q&A
Topic: Why not go with the Dream?
Replies: 3
Views: 10189

Re: Why not go with the Dream?

I've been very happy with my dream. (I'm on three years now). All issues have been resolved other than temperature sensor reliability however I have very high confidence that is about to be solved too. So....bottom line, I would not hesitate in getting one. A solid, very consistent machine.
by goodboyr
Fri Apr 01, 2016 5:08 pm
Forum: Dream In Warranty Issues
Topic: Bad Temperature Sensor
Replies: 25
Views: 72391

Re: Bad Temperature Sensor

I believe la spaz now recognizes there's an issue with the existing design and is working on a fix.
by goodboyr
Fri Apr 01, 2016 10:40 am
Forum: Dream In Warranty Issues
Topic: Bad Temperature Sensor
Replies: 25
Views: 72391

Re: Bad Temperature Sensor

BTW. PH is slightly above neutral after the filters and softener. But note that pH changes dramatically with temperature.
by goodboyr
Fri Apr 01, 2016 10:38 am
Forum: Dream In Warranty Issues
Topic: Bad Temperature Sensor
Replies: 25
Views: 72391

Re: Bad Temperature Sensor

It's an interesting issue. I'm in Toronto, and the water here is "average". Nothing out of the ordinary, and I'm sure I would have heard, given the huge number of espresso enthusiasts here. I have been talking to CCS who are aware of this problem. On their request I've sent failed sensors ...
by goodboyr
Wed Mar 30, 2016 9:08 pm
Forum: Dream In Warranty Issues
Topic: Bad Temperature Sensor
Replies: 25
Views: 72391

Re: Bad Temperature Sensor

Makes sense. Sounds like the old design was superior. I just wish they would deal with this.
by goodboyr
Wed Mar 30, 2016 7:42 pm
Forum: Dream In Warranty Issues
Topic: Bad Temperature Sensor
Replies: 25
Views: 72391

Re: Bad Temperature Sensor

Well, the ammonia experiment failed. And heres a pic of the latest failed sensor. Clearly electrochemical corrosion happening. Brand new CCS softener and filter and my water tests fine. So another email to Tim at CCS to see if there's news from LA spaz.
uploadfromtaptalk1459381347616.jpg
uploadfromtaptalk1459381347616.jpg (30.44 KiB) Viewed 66479 times
by goodboyr
Mon Mar 21, 2016 11:31 am
Forum: General Q&A
Topic: La Spaziale 2015 Corporate Video
Replies: 2
Views: 6792

La Spaziale 2015 Corporate Video

Just noticed this out there. Nice to see where our money goes.......

https://youtu.be/9nk0UGiZ-qA
by goodboyr
Sun Feb 07, 2016 9:33 pm
Forum: Maintenance and Repair
Topic: Boiler Leaks on Mini
Replies: 5
Views: 7359

Re: Boiler Leaks on Mini

Leak 1. That's a push fit connection. When there's no pressure in the line, push in metal ring while pulling the tube to release it.
by goodboyr
Tue Feb 02, 2016 4:12 pm
Forum: Dream and Dream T Common Feature Discussions
Topic: Dream vs GS/3 Throwdown
Replies: 50
Views: 51520

Re: Dream vs GS/3 Throwdown

All good, except for frequent temp sensor failures for some of us.
by goodboyr
Fri Jan 29, 2016 1:26 pm
Forum: Maintenance and Repair
Topic: Can't open the brew boiler!
Replies: 18
Views: 22087

Re: Can't open the brew boiler!

Some of us have all the luck......[emoji4] [emoji6]
by goodboyr
Sat Jan 09, 2016 6:28 pm
Forum: Dream and Dream T Common Feature Discussions
Topic: Software 1.23 & New Manual Updates
Replies: 3
Views: 11108

Re: Software 1.23 & New Manual Updates

Chas: One question for you. If you remember, occasionally the steam boiler level control will trigger a top up. If that happens during a pull, the pressure will drop to about 6 bar. So, does the new tweak that delays refill for 25 seconds fix this issue on Dream machines as well?
by goodboyr
Tue Jan 05, 2016 12:55 pm
Forum: Accessories
Topic: Silicone Gasket Longevity
Replies: 35
Views: 47523

Re: Silicone Gasket Longevity

I'm still on my first ( about one year) and have not experienced the rotating issue.
by goodboyr
Mon Jan 04, 2016 11:08 pm
Forum: Dream In Warranty Issues
Topic: Bad Temperature Sensor
Replies: 25
Views: 72391

Re: Bad Temperature Sensor

I've ordered a couple of sensors as spares for the inevitable failures. I'm going to experiment with one. If we assume they are brass, I will attempt to intentionally create an oxide layer to protect it from corrosion. Going to use ammonia to do this. The idea is that if it has a uniform oxide layer...
by goodboyr
Mon Jan 04, 2016 7:33 pm
Forum: Dream In Warranty Issues
Topic: Bad Temperature Sensor
Replies: 25
Views: 72391

Re: Bad Temperature Sensor

I've had both kinds fail on me.
But I'm still going with the galvanic corrosion theory. My most recent one had a small spot with deposits on it and underneath the deposits the metal was shiny. All the rest of the probe was a uniform thin black deposit.
by goodboyr
Sun Dec 27, 2015 10:42 pm
Forum: Dream In Warranty Issues
Topic: Bad Temperature Sensor
Replies: 25
Views: 72391

Re: Bad Temperature Sensor

Yup. It's good that you are talking to CCS. They are aware of this issue and have communicated to LA spaz in Italy. I have sent them a bunch of my failed sensors. All of my previous theories are just that....theories. Bottom line is that these eventually fail. LA spaz has no answers yet.
by goodboyr
Wed Dec 02, 2015 1:57 pm
Forum: Dream General Q&A
Topic: Brew profiles sharing
Replies: 4
Views: 14408

Re: Brew profiles sharing

Just as a note, latest firmware is 1.21.
by goodboyr
Fri Oct 16, 2015 6:49 pm
Forum: Dream and Dream T Common Feature Discussions
Topic: Software 1.21 is available
Replies: 1
Views: 6662

Re: Software 1.21 is available

OK. I downloaded from the CCS site and installed. It adds a bunch of screensavers and fixes the filter alarm bug. Change log is on the CCS site. Please note that the firmware file on the CCS site needs to be renamed to load properly. You need to delete the word "firmware" from the file nam...
by goodboyr
Tue Oct 13, 2015 9:52 am
Forum: Dream and Dream T Common Feature Discussions
Topic: Software 1.21 is available
Replies: 1
Views: 6662

Software 1.21 is available

Just noticed that there is a firmware update for the dream to version 1.21 on the CCS site.
by goodboyr
Mon Oct 12, 2015 6:54 pm
Forum: Dream General Q&A
Topic: Advice on new S1 Purchase
Replies: 4
Views: 9037

Re: Advice on new S1 Purchase

Dream has membrane buttons, not a touchscreen. Although initially had teething pains, the newer versions of the dream have addressed all issues except the occasionally brew boiler temp sensor failures. I've sent some of my failed sensors to CCS and they said LA spaz in Italy is looking at them, so I...
by goodboyr
Tue Sep 22, 2015 5:58 pm
Forum: Mini Day One Problems
Topic: Mini Vivaldi II water dispensing question
Replies: 6
Views: 16722

Re: Mini Vivaldi II water dispensing question

Actually, the double is programmed to just fill a 2 oz measure. But that includes crema. Once crema subsides, it probably is more like 1.5 or so.
by goodboyr
Tue Sep 22, 2015 5:56 pm
Forum: Mini Day One Problems
Topic: Mini Vivaldi II water dispensing question
Replies: 6
Views: 16722

Re: Mini Vivaldi II water dispensing question

I'm not too much fixated on numbers. I use about 16-17, and adjust grind till I hit 25 - 35 seconds. And that makes me a tasty shot!
by goodboyr
Sun Sep 20, 2015 7:46 pm
Forum: Mini Day One Problems
Topic: Mini Vivaldi II water dispensing question
Replies: 6
Views: 16722

Re: Mini Vivaldi II water dispensing question

I didn't program the single so its at factory default. Double is programmed to just fill a 2/oz measure during an actual pull. You should program with a coffee load in the pf, not an empty pf.
by goodboyr
Tue Jul 28, 2015 8:50 am
Forum: Maintenance and Repair
Topic: S1 Dream - Group Temperature control is not working correctly
Replies: 4
Views: 5874

Re: S1 Dream - Group Temperature control is not working correctly

You are welcome. Could I ask how old your Dream is?
by goodboyr
Tue Jul 28, 2015 5:58 am
Forum: Maintenance and Repair
Topic: S1 Dream - Group Temperature control is not working correctly
Replies: 4
Views: 5874

Re: S1 Dream - Group Temperature control is not working correctly

Yup. I know this well. Your brew boiler temperature sensor has died. Mine have been doing this at approx 6 month intervals. Please get in touch with Tim at CCS. He will get you fixed up. As well, its important that they know this is happening to people other than me! :-)
by goodboyr
Fri Jul 10, 2015 5:11 pm
Forum: Dream T General Q&A
Topic: Fit and finish
Replies: 2
Views: 7724

Re: Fit and finish

I've had mine apart a few times (dream instead of dream t), and it takes a bit of work to get the side panels aligned and tight. There are alignment channels the the back metal panel goes into, and if they are not done right you get the symptom you are describing. So bottom line is that they probabl...
by goodboyr
Mon Apr 06, 2015 12:52 pm
Forum: General Q&A
Topic: GS3
Replies: 15
Views: 18860

And then quickly get it back in before the 3 way exhausts.........:-)
by goodboyr
Tue Feb 24, 2015 1:01 am
Forum: Accessories
Topic: Silicone Gasket Longevity
Replies: 35
Views: 47523

Me too.
by goodboyr
Sun Feb 08, 2015 7:18 am
Forum: Dream General Q&A
Topic: Offset
Replies: 4
Views: 10531

Re: Offset

My offset is 0 with 1.19. It was +8 before that version. Perhaps you might try to reinstall 1.19 while waiting for the scace.
by goodboyr
Mon Feb 02, 2015 10:20 am
Forum: Dream In Warranty Issues
Topic: Bad Temperature Sensor
Replies: 25
Views: 72391

Re: Bad Temperature Sensor

Many of you have read about all the troubles I've had with my Dream's (I had the original version, and my retailer replaced it with the newer 2.0 Dream). I continued to experience periodic failures of the brew temperature sensor. This tended to occur about every 6 months of use. As well, I have repo...
by goodboyr
Fri Jan 30, 2015 7:26 pm
Forum: Mini General Q&A
Topic: Losing Brew Pressure!
Replies: 7
Views: 14050

Re: Losing Brew Pressure!

Isn't this when the auto fill for the steam boiler comes on at the same time as a shot? The pump thus has two discharge paths. Are you making milk based drinks? Try steaming after the shot instead of during or before.
by goodboyr
Wed Jan 21, 2015 11:14 pm
Forum: Maintenance and Repair
Topic: Mini preinfusion chamber failure.
Replies: 11
Views: 12148

Re: Mini preinfusion chamber failure.

Thanks for that...

BTW, I believe I have found the root cause of my issues, including why my Dream experience is different than most. But I want to wait a bit to make sure I've got it solved before I report back.
by goodboyr
Wed Jan 21, 2015 8:12 pm
Forum: Maintenance and Repair
Topic: Mini preinfusion chamber failure.
Replies: 11
Views: 12148

Re: Mini preinfusion chamber failure.

chas wrote:BTW John, we need to give you the coveted "First Person Award" for being the first out of thousands of owners that have had this part fail. :banghead:
I will gladly relinquish my award to John!
:grin:
by goodboyr
Tue Jan 06, 2015 11:43 pm
Forum: General Q&A
Topic: Can't Pull the Shot
Replies: 5
Views: 7232

Re: Can't Pull the Shot

Yes. You program while doing an actual shot. Measure the shot glass level with water so you know where the level is corresponding to the volume you want. Then actually prepare a shot and set the volumetric programming while doing the shot.
by goodboyr
Sat Jan 03, 2015 8:34 pm
Forum: Maintenance and Repair
Topic: Any group gasket removal tips? (edit: And which way is up?)
Replies: 14
Views: 15723

Re: Any group gasket removal tips? (edit: And which way is

Yup. Those silicon gaskets are awesome!
by goodboyr
Mon Dec 01, 2014 6:07 am
Forum: Dream General Q&A
Topic: Fuse issue
Replies: 3
Views: 7248

Re: Fuse issue

Just think of me as a forum resource for absolutely anything that can go wrong with the Dream series..
After all that, I still love that machine.
by goodboyr
Sun Nov 30, 2014 11:46 pm
Forum: Dream General Q&A
Topic: Fuse issue
Replies: 3
Views: 7248

Re: Fuse issue

Me too!
by goodboyr
Fri Nov 28, 2014 1:52 pm
Forum: Dream General Q&A
Topic: Fuse issue
Replies: 3
Views: 7248

Fuse issue

Well, just had another weird one with my Dream. Found it completely dead. Not even flashing red power light. Checked plug and circuit all OK. So, figured maybe a fuse blew. Turned it upside down and checked both fuses. All good. So I reinstalled them, plugged it back in and it powered up fine. So ma...
by goodboyr
Sat Oct 25, 2014 2:23 pm
Forum: Maintenance and Repair
Topic: Dream Steam Boiler overfill - FIXED!
Replies: 8
Views: 13759

Re: Dream Steam Boiler overfill - FIXED!

Thanks. I did note that the gicleur is different on the Dream. There is no adjustment or nut. Instead, the rubber seat mates against a raised spot with a tiny hole in the valve body. The water inlet enters the valve body through a larger hole at the periphery, and when the solenoid operates the plun...
by goodboyr
Sat Oct 25, 2014 2:00 pm
Forum: Maintenance and Repair
Topic: Dream Steam Boiler overfill - FIXED!
Replies: 8
Views: 13759

Dream Steam Boiler overfill - FIXED!

Just had a classic steam boiler overfill problem on my Dream.....but with a twist. Symptoms: Water coming out of vacuum breaker at top of boiler, pressure going way over setpoint, mix of steam and water slugs from steam nozzle. I could draw off lots of water through the water tap before the refill p...

Go to advanced search