Search found 110 matches

by rhinoevans
Sat Nov 13, 2021 9:40 pm
Forum: Maintenance and Repair
Topic: S1 steam boiler
Replies: 0
Views: 1329

S1 steam boiler

Mine broke awhile ago. Anyone know how to turn off the steam boiler from trying to fill every time I turn it one to use the brew boiler. Something on the curcuit board or a wire to pull. Tried to put in econo mode but am unable for some reason
by rhinoevans
Sat Nov 13, 2021 9:33 pm
Forum: General Q&A
Topic: The LaSpaziale S1 Family Of Machines Needs A Serious Refresh!
Replies: 12
Views: 9587

Re: The LaSpaziale S1 Family Of Machines Needs A Serious Refresh!

I have an original S1. The steam boiler broke a year or so ago. No interest in spending over $600 to fix a 17 year old machine. The brew boiler works so I can stil pull shots and heat my milk with my wife’s Nespresso warmer. To be honest, when I bought it I. Was torn between it and a E61 machine. Pr...
by rhinoevans
Sat Nov 13, 2021 9:22 pm
Forum: Swap Meet
Topic: S1 side panels
Replies: 0
Views: 1119

S1 side panels

Looking for side panels. Only really need one black (left as you look at the machine). But will take both. Any color. Not looking to spend much, because I’ll just spend the money on a new machine.
by rhinoevans
Thu Jan 02, 2020 12:11 pm
Forum: Maintenance and Repair
Topic: 5 years... now what?
Replies: 4
Views: 7959

Re: 5 years... now what?

After 14-15 years on a S1, my steam boiler is shot. The hot water elbow on the steamer broke off. Just replaced with new elbow and was a pain getting the rest of the broken pieces out of the boiler. Installing it a few days ago a and when I was tightening the cap on the bottom drain, it snapped off....
by rhinoevans
Tue Dec 31, 2019 11:58 am
Forum: General Q&A
Topic: Group head water flow
Replies: 7
Views: 12063

Re: Group head water flow

Seems normal to me. I think mine is not that good
by rhinoevans
Fri Dec 20, 2019 10:55 am
Forum: Maintenance and Repair
Topic: Hot Water connector broke off on Steam Boiler
Replies: 5
Views: 7426

Re: Hot Water connector broke off on Steam Boiler

CALLED Chris Coffee, they recommenced teflon tape. I thought it would be something different for the steam boiler.
by rhinoevans
Thu Dec 19, 2019 7:27 pm
Forum: Maintenance and Repair
Topic: Hot Water connector broke off on Steam Boiler
Replies: 5
Views: 7426

Re: Hot Water connector broke off on Steam Boiler

Got the broken piece fixed. Anyone know what to put on the threads of the connector on the steam boiler. Type of sealeant
by rhinoevans
Sat Dec 07, 2019 2:59 pm
Forum: Maintenance and Repair
Topic: Non plumbed in S1
Replies: 0
Views: 6771

Non plumbed in S1

Does the S1 have to have a Flowjet if not plumbed in? Currently in my garage with a non pressure water source
by rhinoevans
Sat Nov 30, 2019 1:18 pm
Forum: Maintenance and Repair
Topic: Hot Water connector broke off on Steam Boiler
Replies: 5
Views: 7426

Re: Hot Water connector broke off on Steam Boiler

Thanks. Think after the Holidays I'll just take it to a machine shop and see if they can fit it. Waiting on the elbow connector from Chris Coffee
by rhinoevans
Wed Nov 27, 2019 3:24 pm
Forum: Maintenance and Repair
Topic: Hot Water connector broke off on Steam Boiler
Replies: 5
Views: 7426

Hot Water connector broke off on Steam Boiler

I was working on my S1, doing some minor maintenance and noticed a lot of calcification around the HOT WATER connection on the steam boiler. Was going o replace the water lines and as I tried to loosen the cap the 90 degree elbow connection broke off. Trying to remove what is left in the steam boile...
by rhinoevans
Fri Nov 23, 2018 12:35 pm
Forum: Pursuit of the God Shot
Topic: Cold nose and consistent temps
Replies: 14
Views: 23903

Re: Cold nose and consistent temps

Very nice
by rhinoevans
Sat Jul 28, 2018 11:39 am
Forum: Maintenance and Repair
Topic: No auto dose
Replies: 3
Views: 5838

Re: No auto dose

After fixing the auto dose with flow meter, now I DO NOT get the 3 lights when I do a back flush. Any ideas?
by rhinoevans
Fri Jul 20, 2018 8:45 pm
Forum: Mini General Q&A
Topic: crema, crema, crema
Replies: 7
Views: 11235

Re: crema, crema, crema

I agree with above. I just started roasting my own beans (Hot Air Popcorn Popper) and I am getting too much Crema.
by rhinoevans
Sat Jul 14, 2018 1:06 pm
Forum: Maintenance and Repair
Topic: No auto dose
Replies: 3
Views: 5838

Re: No auto dose

Took the flow meter apart. Propeller was just stuck. Took it out, clean the top part of the cover and propeller. All works
by rhinoevans
Sat Jul 14, 2018 12:28 pm
Forum: Maintenance and Repair
Topic: No auto dose
Replies: 3
Views: 5838

No auto dose

I have been unable to use the auto dose feature for a while. Been using manual. Get the 3 flashing lights in single or double but still able to pull shots with manual timing. What should I look at. Don’t mind manual but if it is an easy fix, sure.

Rhino
by rhinoevans
Sun Jun 25, 2017 11:56 am
Forum: General Q&A
Topic: S1V1 boiler material
Replies: 1
Views: 5132

S1V1 boiler material

Anyone know what metal is used for the boiler and group head? Copper, SS, ?
by rhinoevans
Sun Dec 04, 2016 9:48 pm
Forum: General Q&A
Topic: Two Machines - Multiple Problems
Replies: 3
Views: 7098

Re: Two Machines - Multiple Problems

Any comments on the new LM Linea MINI?
by rhinoevans
Mon Jul 18, 2016 8:18 am
Forum: General Q&A
Topic: New Mini V ii - Need help loving it...
Replies: 5
Views: 10640

Re: New Mini V ii - Need help loving it...

Recommend a triple basket from Chris Coffee. It will hold 21g. That is all I have use for years. And yes the auto dose is just a measures volume of water.
BTW, you will need a bottomless portafilter for the triple basket.
by rhinoevans
Mon Jan 11, 2016 3:20 am
Forum: Accessories
Topic: Silicone Gasket Longevity
Replies: 35
Views: 47627

Re: Silicone Gasket Longevity

Still on my first, in fact I don't even check it any more. Had totally forgot about it till this post!
by rhinoevans
Tue Oct 13, 2015 1:41 am
Forum: Dream General Q&A
Topic: Advice on new S1 Purchase
Replies: 4
Views: 9043

Re: Advice on new S1 Purchase

I have an original S1 for 11 years ago, and still going strong. I have looked at the new Dream and it looks nice. Not sure I need all the digital stuff to make coffee. Set the temp and pressure and the rest is up to the barista. Here is what I have been looking at when and if my S1 stops working. ht...
by rhinoevans
Fri May 01, 2015 8:10 pm
Forum: Maintenance and Repair
Topic: S1V1 Motor
Replies: 45
Views: 47392

Re: S1V1 Motor

Here is some information on a company that will rebuild.
image.jpg
image.jpg (375.9 KiB) Viewed 46327 times
by rhinoevans
Thu Apr 23, 2015 3:02 pm
Forum: Maintenance and Repair
Topic: Insulation or not
Replies: 4
Views: 6987

Re: Insulation or not

jfrescki wrote:I'd thought about insulating my machine for a while, but as I only leave the brew boiler on, I never bothered.

Same
by rhinoevans
Mon Apr 06, 2015 11:54 pm
Forum: General Q&A
Topic: GS3
Replies: 15
Views: 18867

Re: GS3

I wouldn't doi t, even if I had the money. Sure it is a great machine. I have owned an original S1 for ten years and an upgrade to me would be the E61 Vetrano 2B. How much better can the espresso really be. Your cost per cup goes why up with the LM. Look how expensive the machines are in Starbucks a...
by rhinoevans
Sun Apr 05, 2015 7:11 pm
Forum: Coffee Grinders
Topic: New Doserless funnel on Mazzer Super Jolly
Replies: 9
Views: 19446

Re: New Doserless funnel on Mazzer Super Jolly

For what it worth, I have used a DL Rocky for 10 years, and although the DL Super Jolly is nice, I was kinda liking the Doser. All those post about get a DL, in fact the Doser is not all that bad, even for single user home use. Atleast on the Mazzer, I can sweep the chute real time which wasn't poss...
by rhinoevans
Sat Apr 04, 2015 10:07 pm
Forum: Coffee Grinders
Topic: New Doserless funnel on Mazzer Super Jolly
Replies: 9
Views: 19446

Re: New Doserless funnel on Mazzer Super Jolly

Thank you again. I will probably get this funnel a chance. Shipping to Canada is really a little over the top... :-? Just installed the backing plate. Takes a 5/64 drill bit for the 2 small screws if you get the Mazer screws. Drills easy into the SJ body. Actually tightened up the inside bolts with...
by rhinoevans
Sat Apr 04, 2015 10:50 am
Forum: Coffee Grinders
Topic: New Doserless funnel on Mazzer Super Jolly
Replies: 9
Views: 19446

Re: New Doserless funnel on Mazzer Super Jolly

Thank you for posting the pictures. I am seriously considering this alternative since the price is so much better. How is the fit on the body? The cylinder is larger than the Mazzer body right? Doesn't the bead on the top rim prevent a proper attachment? Thanks again The fit is good. Flush against ...
by rhinoevans
Fri Apr 03, 2015 8:04 pm
Forum: Coffee Grinders
Topic: New Doserless funnel on Mazzer Super Jolly
Replies: 9
Views: 19446

Re: New Doserless funnel on Mazzer Super Jolly

chas wrote:You just have to click the attachments tab below the text window while entering a message and follow the instructions found there.
by rhinoevans
Fri Apr 03, 2015 10:41 am
Forum: Coffee Grinders
Topic: New Doserless funnel on Mazzer Super Jolly
Replies: 9
Views: 19446

New Doserless funnel on Mazzer Super Jolly

Here are some pic with a Doserless funnel attached to a Super Jolly. Purchased on ebay for $75. I have the back plate on order from espressoparts.com and should be delivered tomorrow. The original SJ lid kinda fits. The funnel is a little larger that the doser, so the lids fits just inside the top o...
by rhinoevans
Mon Mar 30, 2015 6:23 pm
Forum: Coffee Grinders
Topic: Mazzer Upgrade
Replies: 11
Views: 15822

Re: Mazzer Upgrade

by rhinoevans
Mon Mar 30, 2015 5:27 pm
Forum: Coffee Grinders
Topic: Mazzer Upgrade
Replies: 11
Views: 15822

Re: Mazzer Upgrade

Thank you. I had done my search with "funnel coffee" and it did not come up in the top few hundred... I gave up an asked. I should have tried "funnel grinder"... It looks nice. Does the Mazzer doser lid fit well on top? Does he also do the backing plate? At this time there is no...
by rhinoevans
Sun Mar 29, 2015 3:43 pm
Forum: Coffee Grinders
Topic: Mazzer Upgrade
Replies: 11
Views: 15822

Re: Mazzer Upgrade

Very inexpensive funnel on eBay from a guy making them in Sacramento $85. Probably will pick one up just to experiment. $85 for nozzle and a back plate from Mazzer for $29. Could you post a link to this offer? I also have a SJ that could use a funnel. Now $75 http://www.ebay.com/itm/NEW-Mazzer-Supe...
by rhinoevans
Thu Mar 26, 2015 11:47 am
Forum: Coffee Grinders
Topic: Mazzer Upgrade
Replies: 11
Views: 15822

Re: Mazzer Upgrade

For those interested, here's some photos of my plastic "schnozz" i made for my Mazzer. Works extremely well. I get a little mound right in the center of the PF. No mess and best of all, the pile of grounds is so neat I don't even need to distribute the grounds. Just tamp and go. Took all ...
by rhinoevans
Thu Mar 26, 2015 10:21 am
Forum: Pride Page
Topic: My 2011 model S1 Rossini setup
Replies: 10
Views: 22304

Re: My 2011 model S1 Rossini setup

Eskilbrun, btw, when I was flying F-4 Phantoms in Germany, we flew into Gardermoen and took the train to Oslo and stayed in a youth hotel for the weekend. Great trip and city. Also flew in to Bodo for a weekend. Great place way up North, and I think the sun never set on that trip. Beautiful country ...
by rhinoevans
Tue Mar 24, 2015 7:51 pm
Forum: Pride Page
Topic: My 2011 model S1 Rossini setup
Replies: 10
Views: 22304

Re: My 2011 model S1 Rossini setup

Nice setup. I have a S1 from 2005 and just picked up a Mazzer Super Jolly on ebay. Considering converting too Doserless. Guy on eBay sell a funnel for moch less than Mazzer ($85). Here is a pick with my old Rockey https://www.flickr.com/photos/100505734@N08/16895475066/ And a link to the funnel http...
by rhinoevans
Wed Feb 18, 2015 8:12 pm
Forum: VII General Q&A
Topic: Lot of purging needed
Replies: 6
Views: 8130

Re: Lot of purging needed

About 4 inches, if I remember correctly
by rhinoevans
Mon Feb 16, 2015 12:11 am
Forum: S1 General Q&A
Topic: Silicone Group gasket
Replies: 2
Views: 8109

Silicone Group gasket

Got the group gasket made of silicone and it work great. No long term since I just got it. The seal with the portafilter is great. Was having some least with the triple basket. No leaks with the new gasket
by rhinoevans
Sun Feb 15, 2015 1:05 am
Forum: VII General Q&A
Topic: Shot timings
Replies: 4
Views: 7881

Re: Shot timings

25-30 sec
by rhinoevans
Sat Feb 14, 2015 6:49 am
Forum: VII General Q&A
Topic: Shot timings
Replies: 4
Views: 7881

Re: Shot timings

I add about 5 sec. Although I have been having timing issues because of my grinder. Replaced the burr gears in my Rocky and for some reason my finest setting, just befor the burrs touch and clatter, I can just get a 25-30 shot. Not sure what is going on. Going to put old burrs back in this weekend t...
by rhinoevans
Fri Feb 06, 2015 4:30 pm
Forum: Coffee Grinders
Topic: Super Jolly or Major (WTB)
Replies: 0
Views: 14033

Super Jolly or Major (WTB)

Looking for a used grinder at a reasonable price. Want to upgrade from my Rocky
by rhinoevans
Fri Feb 06, 2015 4:23 pm
Forum: Coffee Grinders
Topic: How discernible in the cup is a grinder upgrade?
Replies: 3
Views: 6231

Re: How discernible in the cup is a grinder upgrade?

I'm sure this had been thoroughly discussed here (or maybe just H-B), but I ordered an SJ last night from Chris Coffee as an upgrade to my Rocky and want to know if I am really going to taste it in the cup. Sorry if this is redundant, but the board has been a little slow lately and thought I would ...
by rhinoevans
Fri Jan 30, 2015 6:36 pm
Forum: Coffee Grinders
Topic: Mazzer Major Grocery model
Replies: 1
Views: 4812

Mazzer Major Grocery model

Any one have any info on this model. Much cheaper that the Major E. Can it be used as a Doserless grinder. Brand new $865

http://www.espressodealer.com/catalog/m ... p-403.html
by rhinoevans
Mon Jan 19, 2015 6:14 pm
Forum: Accessories
Topic: Silicone long life Group Gaskets available
Replies: 52
Views: 86051

Re: Silicone long life Group Gaskets available

I could not get pm to work either. Just sentpaypal money to his hotmail account and sent email to same addressed. Just received email that it has already shipped. Can't wait. So tired of those rubber gaskets
by rhinoevans
Sun Jan 18, 2015 12:05 pm
Forum: Accessories
Topic: Silicone long life Group Gaskets available
Replies: 52
Views: 86051

Re: Silicone long life Group Gaskets available

Sent paypal
by rhinoevans
Sat Jan 17, 2015 5:50 pm
Forum: Maintenance and Repair
Topic: Mini preinfusion chamber failure.
Replies: 11
Views: 12151

Re: Mini preinfusion chamber failure.

I have one on my original S1V1. Makes me wonder if I should pull mine. :shock: :shock:
by rhinoevans
Thu Jan 08, 2015 8:09 pm
Forum: Maintenance and Repair
Topic: Rocky bur gear change
Replies: 4
Views: 6656

Re: Rocky bur gear change

Tim at Chriss Coffee said he could tell no difference in the bur gears. Sending me a new set and I hope,it works. It not going to Home Depot to get some very thin washers to raise the gears .
by rhinoevans
Mon Jan 05, 2015 7:56 pm
Forum: S1 Operational Problems
Topic: recalibrating steam boiler pressure gauge?
Replies: 8
Views: 16877

Re: recalibrating steam boiler pressure gauge?

If you give up on that gauge I've seen plenty of round 60 & 62mm dual pressure gauges on different espresso machine parts sites. Just open up your hole with a die grinder or small cut off wheel to fit, pick up a brass tee & fabricate the copper connecting tube or buy it from CC if they have...
by rhinoevans
Sun Jan 04, 2015 12:02 pm
Forum: General Q&A
Topic: S1 dream vs e61
Replies: 2
Views: 4843

Re: S1 dream vs e61

not sure I would buy a machine labeled "Cute". Just saying...
by rhinoevans
Fri Jan 02, 2015 8:01 pm
Forum: General Q&A
Topic: Pre-Infusion On S1 - Any Good?
Replies: 4
Views: 6698

Re: Pre-Infusion On S1 - Any Good?

Nope. Not in the 2B. Maybe a magic sales trick the doesn't mean that much in the cup? Chas??? Can you really tell on your G3?
by rhinoevans
Fri Jan 02, 2015 7:52 pm
Forum: General Q&A
Topic: Pre-Infusion On S1 - Any Good?
Replies: 4
Views: 6698

Re: Pre-Infusion On S1 - Any Good?

I have one, not sure worth the money. Probably wouldn't not buy again. I have no idea what preinfussion is supposed to taste like. Neve had a shot from a machine that has it. Been drinking espresso from my S1 for over 10 years now, but am looking to upgrade this year. Probably the verano 2B, but now...
by rhinoevans
Fri Jan 02, 2015 7:48 pm
Forum: Maintenance and Repair
Topic: Rocky bur gear change
Replies: 4
Views: 6656

Re: Rocky bur gear change

Good point, thanks
by rhinoevans
Fri Jan 02, 2015 3:12 pm
Forum: Maintenance and Repair
Topic: Rocky bur gear change
Replies: 4
Views: 6656

Rocky bur gear change

Ordered some bur gears for the DL Rocky grinder about a year ago. At the time thought the old burs were still good. Decided to change out today. Very difficult to remove the screws holding the burs but finally was able to remove. Cleaned up the grinder and installed the new burs. On reassemble I was...
by rhinoevans
Fri Jan 02, 2015 11:40 am
Forum: Maintenance and Repair
Topic: S1V1 Motor
Replies: 45
Views: 47392

Re: S1V1 Motor

24 hours later and no overfill and a perfectly acting boiler. I can't believe that is was just not locking down the fill probe. Very inexpensive fix. My S1 seems just like the day I bought it 10 years ago. I might be one of the few with the old controller board and the old steam arm.
by rhinoevans
Fri Jan 02, 2015 11:36 am
Forum: Maintenance and Repair
Topic: Work on a Vivaldi 1
Replies: 19
Views: 33569

Re: Work on a Vivaldi 1

When I took my boiler apart the other day, and was very cautious on putting it back together, on start up same error. I tried to remove the temp probe and it seemed stuck. Of comes the boiler top again and it seemed the the tube that the temp probes goes into was slightly bent. Have no idea how. Str...
by rhinoevans
Thu Jan 01, 2015 9:38 pm
Forum: Maintenance and Repair
Topic: Pre infusion fitted... now back flush noise
Replies: 6
Views: 8048

Re: Pre infusion fitted... now back flush noise

I think it is just the back flush of the water. Added mine a year ago, not sure I can taste the difference in the cup, but I don't regret it.
by rhinoevans
Thu Jan 01, 2015 5:22 pm
Forum: Maintenance and Repair
Topic: S1V1 Motor
Replies: 45
Views: 47392

Re: S1V1 Motor

New Years Day, all panels off the S1 while i somewhat troubleshoot/tinker over the last few days. From the wife, Are you going to put that THING back together. It is obvious you dont know how to fix it!!! Probably some truth to that. OK, figured out two things on my boiler overfill: 1. Water get to ...
by rhinoevans
Tue Dec 30, 2014 7:57 pm
Forum: Maintenance and Repair
Topic: S1V1 Motor
Replies: 45
Views: 47392

Re: S1V1 Motor

Well not so fast. Big leak under the machine from the boiler. It was leaking from the steam pressure relief. So I took the top off the boiler to look inside and saw a 4 inch plastic tube laying in the bottom of the boiler. Is the very long metal probe supposed to be completely covered by a plastic t...
by rhinoevans
Tue Dec 30, 2014 6:24 pm
Forum: Maintenance and Repair
Topic: S1V1 Motor
Replies: 45
Views: 47392

Re: S1V1 Motor

How would I tell if the pump seal is bad? The water got to the bearing some how. Who reduilds the pumps?
by rhinoevans
Tue Dec 30, 2014 4:26 pm
Forum: Maintenance and Repair
Topic: S1V1 Motor
Replies: 45
Views: 47392

S1V1 Motor

I have had the S1V1 since 2003, with little problems in the last 11 years. Minor stuff, probably the most troubling was with the steam boiler. Had 2 issues: no water to the boiler and when I finally got water to the boiler, it would over fill. We almost always do iced coffee, so not the big of a dea...
by rhinoevans
Sun Nov 17, 2013 11:41 am
Forum: Maintenance and Repair
Topic: Trying again...pressure problems.
Replies: 2
Views: 4521

Re: Trying again...pressure problems.

I am not questioning your barista skills, but to me sound like chocking the machine because of way to fine grind and tamp pressure. What does it do with a loser grind and tamp. I have choked mine before with to hard a tamp and very fine grind. Takes for ever and very bitter. Just a thought. Although...
by rhinoevans
Sun Nov 17, 2013 11:35 am
Forum: Pursuit of the God Shot
Topic: New Precision Shower Screens / Baskets @ CC
Replies: 3
Views: 7969

Re: New Precision Shower Screens / Baskets @ CC

I bought both. Not sure screen that much better, but atleast I have a second set. Triple basket awesome!!!
by rhinoevans
Wed Sep 25, 2013 11:57 am
Forum: Mini General Q&A
Topic: Does seasonality affect grinder settings
Replies: 2
Views: 5910

Re: Does seasonality affect grinder settings

Coriolis effct and rotation of the earth, possibly. :shock:
by rhinoevans
Thu Aug 15, 2013 3:22 pm
Forum: Mini General Q&A
Topic: Indent in puck
Replies: 4
Views: 8366

Re: Indent in puck

I bought both, the basket and the precision group screen. Really like the triple , but not sure the group screens better. Look better, buy every once and awhile i will have a tiny stream of coffee that comes off at about a 45 degree angle and sometimes is outside the cup.
by rhinoevans
Sat Aug 03, 2013 1:52 am
Forum: Mini Day One Problems
Topic: Steam boiler issue
Replies: 23
Views: 24484

Re: Steam boiler issue

Late on this end, so done for the night. A few observations 1. No mineral deposits, just some black residue which I cleaned up 2. Did not have to loosen the nut, the probe came right out with ease. Retightened the nut and now probe held on place. Maybe that was the problem ??? 3. To late to deal wit...
by rhinoevans
Sat Aug 03, 2013 12:35 am
Forum: Mini Day One Problems
Topic: Steam boiler issue
Replies: 23
Views: 24484

Re: Steam boiler issue

Not really coated with mineral deposits. It is kinda black looking, but currently soaking in vinegar.
by rhinoevans
Fri Aug 02, 2013 9:34 pm
Forum: Mini Day One Problems
Topic: Steam boiler issue
Replies: 23
Views: 24484

Re: Steam boiler issue

Ok. Cleaned out the device. Water to the steam boiler. Big success however water pouring out the top of the steam boiler. Had to shut water off. Coing out if both sensors. Don't know what to do now. When to Home Depot and bought a plug to stop water from solenoid to boiler. We only drink Iced mostly...
by rhinoevans
Fri Aug 02, 2013 6:17 pm
Forum: Mini Day One Problems
Topic: Steam boiler issue
Replies: 23
Views: 24484

Re: Steam boiler issue

Just what I needed, a simple picture. I just could not see how that part that goes through the electrical coil would move. Seemed pretty in movable. Thanks

BTW the S1 is 2003, so older than I thought
by rhinoevans
Fri Aug 02, 2013 4:25 pm
Forum: Mini Day One Problems
Topic: Steam boiler issue
Replies: 23
Views: 24484

Re: Steam boiler issue

Can that metal part be soaked in citric acid?

But more tithe point, exacty how do they work, the mechanics involved? The selinoid causes what to happen on the metal part?

There is mineral build up in the metal part
by rhinoevans
Thu Aug 01, 2013 10:24 pm
Forum: Mini Day One Problems
Topic: Steam boiler issue
Replies: 23
Views: 24484

Re: Steam boiler issue

Took apart my S1 today to try and figure why no water to steam boiler. Can some explain how part 7696 works. I have water prior that that part. Took out the gliecer . Did not see anything. Appears that 7696 has some calcification. Can it be soaked in citric acid. Just the metal part.
by rhinoevans
Sun Jul 28, 2013 3:21 am
Forum: Mini Day One Problems
Topic: Steam boiler issue
Replies: 23
Views: 24484

Re: Steam boiler issue

Many post on this forum for that. Try Search. But I would say most likey cause is water not getting through to the steam boiler. first place to check is: Cut and Paste below is from Chas post. Perhaps my water is harder than yours. I had a similar problem to yours with my original S1 but it took les...
by rhinoevans
Wed Jul 24, 2013 4:47 am
Forum: General Q&A
Topic: Espro Tamper and Triple Basket
Replies: 0
Views: 10083

Espro Tamper and Triple Basket

Just picked up a used Espro Tamper, shipped for $40. Too good to pass up. Being using a RB for 10 years without knowing how many PSI. So, BTW, I am still in Saudi Arabia, home next week for 7 days. Yippee. I Will be pulling shots all day long for 7 days. So tired of French Press. NEED SOME ESPRESSO!...
by rhinoevans
Tue Jul 23, 2013 11:40 pm
Forum: General Q&A
Topic: Triple Shots
Replies: 7
Views: 7912

Re: Triple Shots

Sad to announce the retirement of the truly faithful Double basket. Long live the Triple!!!
by rhinoevans
Fri Jul 19, 2013 10:46 am
Forum: General Q&A
Topic: Triple Shots
Replies: 7
Views: 7912

Re: Triple Shots

Wife pull a triple with the standard double button. She said very good, and said that same volume as with a double basket. She is not into the scientific aspects of espresso, so now she doesnt weight the beans, doesnt time her shots, doesnt measure her volume, but is she said it was good and better ...
by rhinoevans
Thu Jul 18, 2013 4:36 am
Forum: General Q&A
Topic: Triple Shots
Replies: 7
Views: 7912

Triple Shots

Just got my new Portafilter with a new triple basket. I am currently in Saudi Arabia, and will not be home for 2 weeks. Wife is trying to use the triple basket. What are the rules? Just push the double button, or reprogram for a longer pull??? The first one she did with the triple was to push single...
by rhinoevans
Wed Jul 17, 2013 10:03 am
Forum: General Q&A
Topic: New Quick Mill vs any NEW La Spaziale
Replies: 3
Views: 5919

Re: New Quick Mill vs any NEW La Spaziale

Great Advice. Thanks. Sure will seem different from pushing the 2 Cup button on the S1 and i guess timing the lever action. Hope the wife can adjust. :shock: :shock:
by rhinoevans
Tue Jul 16, 2013 4:16 am
Forum: General Q&A
Topic: New Quick Mill vs any NEW La Spaziale
Replies: 3
Views: 5919

New Quick Mill vs any NEW La Spaziale

If you havent been tracking the discussion on Coffeegeek about the new Quick Mill, it is worth a look. Here is the link for it on Chris Coffee website. https://www.chriscoffee.com/Vetrano_2B_p/db995.htm Looks nice. I am in the market for a new machine, upgrading from an S1V1. Looking at all the curr...
by rhinoevans
Thu Jul 11, 2013 6:37 am
Forum: Coffee Grinders
Topic: Rocky Rancillo
Replies: 0
Views: 11751

Rocky Rancillo

I have owned and used my Rocky for the last 9 years. Works great. I been reading where people have chanhed the BURR set every 2-3 years or so. Really!!! :shock: :shock: Never changed my, but dur routien cleaning, but not lately. SO I gave in and order some new Burr from Chriss COffee. Will Post some...
by rhinoevans
Thu Jul 11, 2013 4:36 am
Forum: Suggested Improvements
Topic: Basket Improvements
Replies: 114
Views: 127200

Re: Basket Improvements

Also like the idea on the new portafilter you can remove the filter basket without MAJOR tools
by rhinoevans
Thu Jul 11, 2013 4:35 am
Forum: Suggested Improvements
Topic: Basket Improvements
Replies: 114
Views: 127200

Re: Basket Improvements

Just ordered new bottomless portafiler with new precision triple. Shipped yesterday, along with some other goodies from Chris Coffee. Mary at Chris Coffee is Awesome!
by rhinoevans
Tue Jul 09, 2013 1:07 am
Forum: Suggested Improvements
Topic: Basket Improvements
Replies: 114
Views: 127200

Re: Basket Improvements

Any additional comments on the new PRECISION baskets, and any comments on the new triple. I have the old Bottonless Portafilter and the website says the new triple will not work. So I would have to buy the new portafilter which comes with the new triple basket. Is it worth the $90???
by rhinoevans
Mon Jul 08, 2013 11:25 am
Forum: Pride Page
Topic: S1V1 and Rocky
Replies: 0
Views: 12926

S1V1 and Rocky

Pic of my 9 year old S1
by rhinoevans
Sun Jun 30, 2013 10:30 am
Forum: S1 General Q&A
Topic: Help.. need to adjust pressure valve on S1
Replies: 3
Views: 8893

Re: Help.. need to adjust pressure valve on S1

TomP10. Can you into more detail on your descaling process?
by rhinoevans
Fri Jun 28, 2013 2:16 am
Forum: General Q&A
Topic: S1 Rebuild
Replies: 3
Views: 4639

Re: S1 Rebuild

Thanks for all the advice

Was considering a new VII until I saw this

https://www.chriscoffee.com/Cimbali_Jun ... junior.htm

Ay comments
by rhinoevans
Thu Jun 27, 2013 4:35 am
Forum: General Q&A
Topic: Breville BES900XL - Competition?
Replies: 15
Views: 20814

Re: Breville BES900XL - Competition?

I was considering this machine ( Current S1 owner) since I can get one for free with my United Airlines points. I have read every post (over 250) on CoffeeGeek.com. And have decided to pass, even though it would be free. Why? A few reasons 1. I truly believe you get what you pay for 2. Made in China...
by rhinoevans
Thu Jun 27, 2013 4:07 am
Forum: General Q&A
Topic: S1 Rebuild
Replies: 3
Views: 4639

S1 Rebuild

Thinking of totally rebuilding my S1. I have had it for 8-9 years (Thanks to Chris COffee, 2005). I have done minimum maintenance . Also wiggle and routinely chemical flush. Machine runs great pulling espresso, which is what we almost exclusively use for iced lattes. The steam boiler will not fill, ...
by rhinoevans
Fri Jun 21, 2013 11:28 am
Forum: Maintenance and Repair
Topic: Steam Boiler Not Refilling
Replies: 16
Views: 19202

Re: Steam Boiler Not Refilling

Good Call. I just thought that since water was getting to the group, it was not an issue. Thanks for the advice.
by rhinoevans
Thu Jun 20, 2013 3:01 am
Forum: Maintenance and Repair
Topic: Steam Boiler Not Refilling
Replies: 16
Views: 19202

Re: Steam Boiler Not Refilling

Chas, I am probably in the market for a new machine. Any comments on the two listed in your signature?
by rhinoevans
Thu Jun 20, 2013 2:46 am
Forum: Maintenance and Repair
Topic: Steam Boiler Not Refilling
Replies: 16
Views: 19202

Re: Steam Boiler Not Refilling

I plan on doing both. The gicleur and the metal mesh filter. Thanks for the advice, but you do agree it is not the 280?
by rhinoevans
Wed Jun 19, 2013 12:18 pm
Forum: Maintenance and Repair
Topic: Steam Boiler Not Refilling
Replies: 16
Views: 19202

Re: Steam Boiler Not Refilling

I am having problems with my steam tank not filling. Pulling espresso shots are no problem. So the brew head works normal. We most always do iced coffees so the steam is seldom used. After reading the above post, i dont see how the part 280 sticking could be my problem since the brew head functions ...
by rhinoevans
Sat May 15, 2010 7:50 pm
Forum: Maintenance and Repair
Topic: Constant drip
Replies: 1
Views: 3350

Constant drip

I know thw answer is here somewhere, I just cant find it. Constant drip into my Drip tray. Fills up in two days. I have flushed and cleaned, no success. Any ideas on what to do to make it stop.
by rhinoevans
Fri Feb 10, 2006 1:19 pm
Forum: Pride Page
Topic: My Setup
Replies: 2
Views: 5503

My Setup

Image
by rhinoevans
Fri Feb 10, 2006 12:32 pm
Forum: Tips & Tricks
Topic: Plumbing in the S1 from Laundry room
Replies: 2
Views: 4310

I did almost the same type of set up for mine. It is on the opposite side of the kitchen from the sink. Next to the refrig. Iwas going to split off the water line from the refrig, but on the other side of the wall is the downstars bathroom. I tapped into the cold water line from the sink, ran a filt...
by rhinoevans
Sun Dec 25, 2005 3:08 pm
Forum: General Q&A
Topic: S1 for Xmas - newbie questions
Replies: 3
Views: 3875

Not sure if there is a triple, since the basket size for the S1 is an off size. Oh, by the way, my S1 is 2 years old today
by rhinoevans
Wed Sep 28, 2005 12:35 am
Forum: General Q&A
Topic: Gasket
Replies: 3
Views: 4455

That was in for 1 1/2 years, but not 24/7.
by rhinoevans
Sun Sep 25, 2005 3:34 pm
Forum: General Q&A
Topic: Gasket
Replies: 3
Views: 4455

Gasket

Changed my group head gasket this mornig, the other one was hard as a brick, brittle, and cracking. How often do yhou change this thing?
by rhinoevans
Sun Sep 25, 2005 3:30 pm
Forum: General Q&A
Topic: Pressure REgulator
Replies: 1
Views: 3367

Pressure REgulator

Onwed my S1 for 1 1/2 years now, and this is the first I have heard of a pressure regulator. Need or not??
by rhinoevans
Sun Sep 25, 2005 3:26 pm
Forum: General Q&A
Topic: The age old backflush question
Replies: 7
Views: 6732

I no longer backflush with Cafiza. I do the wiggle to clean the head of grounds after every pull. I clean the screens and disk every other month. Sometimes I do a backflush with water only every now and then. I do not know why I do this???
by rhinoevans
Sun Aug 28, 2005 2:31 pm
Forum: General Q&A
Topic: Cost of Electricity to Operate the S1
Replies: 9
Views: 9856

So it cycles to keep the group hot all day and that is included in the cost of electricity?

Go to advanced search