Hi I know I have already asked this in a roundabout way but I wanted to know how long people extract for if you have mechanical pre-infusion fitted. I am currently trying 30 seconds (including any Preinfusion time) but I emailed Chris coffee and they said you should add not time for preinfusion I.e. I should just aim for my usual 27 seconds. What do people think? Thanks
Sent from my iPhone using Tapatalk
Shot timings
-
- Vivaldi Dreamer
- Posts: 110
- Joined: Tue Aug 17, 2004 2:32 pm
- Location: Las Vegas
Re: Shot timings
I add about 5 sec. Although I have been having timing issues because of my grinder. Replaced the burr gears in my Rocky and for some reason my finest setting, just befor the burrs touch and clatter, I can just get a 25-30 shot. Not sure what is going on. Going to put old burrs back in this weekend to see if that makes a difference
Re: Shot timings
Sorry to hear of your grinder problems - sounds frustrating. You add about 5 seconds to what time?. If you grinder was working perfectly and you could chose your exact extraction time what would it be?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Vivaldi Dreamer
- Posts: 110
- Joined: Tue Aug 17, 2004 2:32 pm
- Location: Las Vegas
Re: Shot timings
25-30 sec
Shot timings
Thanks rhino.. I have dropped down to these timings and am getting much better results. Thanks for the advice.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk